Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T22:51:17.659Z Has data issue: false hasContentIssue false

High laser damage threshold reflective optically addressed liquid crystal light valve based on gallium nitride conductive electrodes

Published online by Cambridge University Press:  24 August 2022

Zhibo Xing
Affiliation:
National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, ChinaCenter of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Wei Fan*
Affiliation:
National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, ChinaCenter of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Dajie Huang
Affiliation:
National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
He Cheng
Affiliation:
National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Tongyao Du
Affiliation:
National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
*
Correspondence to: W. Fan, National Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, 390 Qinghe Road, Jiading District, Shanghai 201800, China. Email: fanweil@siom.ac.cn

Abstract

In this paper, the feasibility of a high laser damage threshold liquid crystal spatial light modulator based on gallium nitride (GaN) transparent conductive electrodes is proved. The laser-induced damage threshold (LIDT) is measured, and a high LIDT reflective optically addressed liquid crystal light valve (OALCLV) based on GaN is designed and fabricated. The proper work mode of the OALCLV is determined; the OALCLV obtained a maximum reflectivity of about 55% and an on–off ratio of 55:1, and an image response is demonstrated.

Information

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
© The Author(s), 2022. Published by Cambridge University Press in association with Chinese Laser Press
Figure 0

Figure 1The basic structure of the reflective OALCLV.

Figure 1

Table 1The parameters in the simulation of the HFE mode reflective liquid crystal cell.

Figure 2

Figure 2The relationship between the driving voltage on the liquid crystal cell and the reflectivity of the OALCLV. Only the loss of the liquid crystal layer is considered; the other layers are considered as ideal materials.

Figure 3

Table 2The parameters of the liquid crystal cell in Equation (1).

Figure 4

Figure 3The relationship between the ratio of the voltage of the liquid crystal layer and the total voltage and the driving frequency in the (a) off-state and (b) the on-state.

Figure 5

Figure 4Schematic of the experimental facility used for the GaN damage resistance test.

Figure 6

Figure 5The laser damage data of the GaN single crystal. The experimental data of the damage probability are represented by discrete points, while the fitting data are represented by the linear fitting line.

Figure 7

Figure 6The damage spot micrograph of the GaN single crystal specimen (the measuring scale is shown in the figure).

Figure 8

Table 3The parameters in the damage resistance test of the GaN single crystal.

Figure 9

Table 4The experimental setup and result of the reflective OALCLV.

Figure 10

Figure 7The image response of full black input (a) and full white input (b) of the OALCLV.

Figure 11

Figure 8The test result (rising curve (a) and declining curve (b)) of the response speed of the OALCLV.

Figure 12

Figure 9The image response test result of the reflective OALCLV: input ((a), (c)) and output ((b), (d)).