Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T20:09:20.004Z Has data issue: false hasContentIssue false

Spectral purity systems applied for laser-produced plasma extreme ultraviolet lithography sources: a review

Published online by Cambridge University Press:  23 June 2023

Nan Lin*
Affiliation:
School of Microelectronics, Shanghai University, Shanghai, ChinaDepartment of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Yunyi Chen
Affiliation:
School of Microelectronics, Shanghai University, Shanghai, ChinaDepartment of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Xin Wei
Affiliation:
School of Microelectronics, Shanghai University, Shanghai, ChinaDepartment of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Wenhe Yang
Affiliation:
School of Microelectronics, Shanghai University, Shanghai, ChinaDepartment of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Yuxin Leng*
Affiliation:
Department of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
*
Correspondence to: Nan Lin and Yuxin Leng, Department of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. Email: nanlin@siom.ac.cn (N. Lin); lengyuxin@mail.siom.ac.cn (Y. Leng)
Correspondence to: Nan Lin and Yuxin Leng, Department of Precision Optics Engineering, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. Email: nanlin@siom.ac.cn (N. Lin); lengyuxin@mail.siom.ac.cn (Y. Leng)

Abstract

With the development of high-volume manufacturing for very-large-scale integrated circuits, the purity of the light source in the extreme ultraviolet lithography (EUVL) system needs to fulfil extreme requirements in order to avoid thermal effect, optical distortion and critical dimension errors caused by out-of-band radiations. This paper reviews the key technologies and developments of the spectral purity systems for both a free-standing system and a built-in system integrated with the collector. The main challenges and developing trends are also discussed, with a view towards practical applications for further improvement. Designing and manufacturing spectral purity systems for EUVL is not a single task; rather, it requires systematic considerations for all relevant modules. Moreover, the requirement of spectral purity filters drives the innovation in filtering technologies, optical micromachining and advanced metrology.

Information

Type
Review
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0), which permits unrestricted re-use, distribution and reproduction, provided the original article is properly cited.
Copyright
© The Author(s), 2023. Published by Cambridge University Press in association with Chinese Laser Press
Figure 0

Figure 1Schematic of the LPP-EUVL source system. Reprinted from Ref. [7].

Figure 1

Figure 2Role of the collector in the light source system: the collector collects radiations and reflects them to the IF for subsequent optical path propagation. Reprinted from Ref. [13].

Figure 2

Table 1Radiations in the EUVL light source[14].

Figure 3

Figure 3Calculated reflectance of the 50-bilayer Mo/Si multilayer coating of 6.9 nm periodicity. Reprinted from Ref. [15].

Figure 4

Figure 4The black border’s influence on CD errors of the corners and edges of the adjacent field. Reprinted from Ref. [25].

Figure 5

Figure 5EUVL system with possible locations for the transmissive SPF.

Figure 6

Figure 6Grid transmissive SPF of IR suppression: (a) scanning electron microscopy image of the grid after etching, (b) grid SPF after backside wet etching, (c) grid SPF with a diameter of 90 mm installed for measurement and (d) grid SPF installed in the LPP source system. Adapted from Ref. [19].

Figure 7

Figure 7DGL's location and its influence on outgassing suppression. Reprinted from Ref. [31].

Figure 8

Figure 8OoB suppression performance with DGLm: (a) complete suppression of DUV radiation (<0.1% transmitted) as measured by PTB; (b) 78% IR suppression as measured off-line by Fourier transform infrared spectroscopy. Adapted from Ref. [31].

Figure 9

Figure 9Collector with a grating structure from Gigaphoton, Inc. Reprinted from Ref. [15].

Figure 10

Figure 10Schematic of the IR suppression design with the collector integrated with the rectangular substrate grating. Adapted from Ref. [47].

Figure 11

Figure 11Schematic of the rectangular multilayer grating.

Figure 12

Figure 12Schematic of the blazed multilayer grating.

Figure 13

Figure 132D pyramid multilayer grating on the collector: (a) design of the multilayer pyramids; (b) UV-suppression performance of Si pyramids and the Mo/Si multilayer mirror in (a); (c) EUV performance comparison of Si pyramids and the Mo/Si multilayer mirror in (a). Adapted from Refs. [53,60].

Figure 14

Figure 14Design of the rectangular substrate grating: (a) schematic of 1D rectangular substrate grating; (b) schematic of 2D rectangular substrate grating by IOF. Adapted from Refs. [53,62].

Figure 15

Figure 15(a) AFM image of diamond-turned patterns and (b) the mechanical polished surface of (a). Reprinted from Ref. [49].

Figure 16

Figure 16HSFR results (AFM) of adding a smoothing layer by Rigaku: (a) diamond-turned surface sample; (b) smoothed diamond-turned surface sample; (c) 0.14–0.29 nm rms over 2.2 μm scans; (d) 0.29–0.39 nm rms over 8.7 μm scans of the grating surface. Adapted from Refs. [8,15].

Figure 17

Figure 17Different measurements for roughness at different spatial frequencies. Adapted from Ref. [70].

Figure 18

Figure 18WLI analysis of a dual-layer rectangular substrate grating structure by the IOF. Reprinted from Ref. [62].

Figure 19

Figure 19ARS instrument ALBATROSS for scattering measurements in the UV-VIS-IR range. Components include laser sources (1), mechanical chopper for lock-in amplification (2), attenuation filters (3), beam preparation optics (4), polarizer (5), sample (6) and detector (7). Adapted from Ref. [62].

Figure 20

Figure 20EUV-ARS for the characterization of nanometre structures exposed by PTB. Reprinted from Ref. [87].

Figure 21

Figure 21Mechanics of the EUV reflectometer by PTB. Reprinted from Ref. [89].

Figure 22

Figure 22Schematic of the IR suppression test stand. Reprinted from Ref. [8].

Figure 23

Figure 23(a) Schematic of the collector integrated with the blazed substrate grating and (b) schematic of the collector with power recycling mirrors. Reprinted from Refs. [96,97].