Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T13:55:36.745Z Has data issue: false hasContentIssue false

Tunable X-ray frequency comb generation at the Shanghai soft X-ray Free-Electron Laser facility

Published online by Cambridge University Press:  04 November 2024

Lanpeng Ni
Affiliation:
Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, ChinaUniversity of Chinese Academy of Sciences, Beijing, ChinaZhangjiang Laboratory, Shanghai, China
Yaozong Xiao
Affiliation:
Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, ChinaUniversity of Chinese Academy of Sciences, Beijing, China
Zheng Qi*
Affiliation:
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, China
Chao Feng*
Affiliation:
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, ChinaUniversity of Chinese Academy of Sciences, Beijing, China
Zhentang Zhao
Affiliation:
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, ChinaUniversity of Chinese Academy of Sciences, Beijing, China
*
Correspondence to: C. Feng and Z. Qi, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210, China. Emails: fengc@sari.ac.cn (C. Feng); qiz@sari.ac.cn (Z. Qi)
Correspondence to: C. Feng and Z. Qi, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210, China. Emails: fengc@sari.ac.cn (C. Feng); qiz@sari.ac.cn (Z. Qi)

Abstract

X-ray frequency combs (XFCs) are of great interest in many scientific research areas. In this study, we investigate the generation of high-power tunable XFCs at the Shanghai soft X-ray Free-Electron Laser facility (SXFEL). To achieve this, a chirped frequency-beating laser is employed as the seed laser for echo-enabled harmonic generation of free-electron lasers. This approach enables the formation of an initial bunching of combs and ultimately facilitates the generation of XFCs under optimized conditions. We provide an optical design for the chirped frequency-beating seed laser system and outline a method to optimize and set the key parameters that meets the critical requirements for generating continuously tunable XFCs. Three-dimensional simulations using realistic parameters of the SXFEL demonstrate that it is possible to produce XFCs with peak power reaching 1.5 GW, central photon energy at the carbon K edge (~284 eV) and tunable repetition frequencies ranging from 7 to 12 THz. Our proposal opens up new possibilities for resonant inelastic X-ray scattering experiments at X-ray free-electron laser facilities.

Information

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0), which permits unrestricted re-use, distribution and reproduction, provided the original article is properly cited.
Copyright
© The Author(s), 2024. Published by Cambridge University Press in association with Chinese Laser Press
Figure 0

Figure 1Schematic layout of the proposed method (a) and the design of the chirped frequency-beating seed laser system (b). The movement direction of the movable platform is indicated by black bidirectional arrows.

Figure 1

Figure 2Schematic diagram of the chirped frequency-beating laser.

Figure 2

Figure 3Wigner distribution of an XFC.

Figure 3

Figure 4Repetition frequency ${f}_{\mathrm{ref}}$ with respect to $N$ and the linear chirp rate $\mu$.

Figure 4

Table 1The parameters of the laser system.

Figure 5

Figure 5Schematic diagram of the Wigner distribution (a) and envelope (b) of the frequency-beating laser.

Figure 6

Table 2The parameters used in the simulation.

Figure 7

Figure 6Longitudinal phase space evolution. Schematic of the phase space of electron beams in the scheme: after Modulator 1 (a), after Chicane 1 (b) and after Chicane 2 (c), (d).

Figure 8

Figure 7Bunching optimization of EEHG for ${A}_1$= 3 and ${A}_2$= 4 (a) and the initial bunching factor distribution of the electron beam (b).

Figure 9

Figure 8Radiation performance of the proposed method. Spectra (a) and saturation power distributions (b) of the XFC.

Figure 10

Figure 9Radiation spectrum when the time delay $\tau$ is 5.50 ps rather than the optimized value of 4.91 ps.

Figure 11

Figure 10Power and spectrum distributions of the XFCs when N = 2 and N = 1/2.

Figure 12

Figure 11Spectra of the XFCs when an initial 30 fs laser is used.

Figure 13

Figure 12XFC radiation spectra with the relative time delay deviating $\pm 100\;\mathrm{fs}$ from the optimized value of 4.91 ps for $N$ = 1.