Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T04:25:28.408Z Has data issue: false hasContentIssue false

Compact UWB–MIMO antenna with quad-band-notched characteristic

Published online by Cambridge University Press:  10 November 2016

Ling Wu*
Affiliation:
College of Physical Science and Technology, Huazhong Normal University, No.152 Luoyu Road, Wuhan, Hubei 430070, People's Republic of China
Yingqing Xia
Affiliation:
College of Physical Science and Technology, Huazhong Normal University, No.152 Luoyu Road, Wuhan, Hubei 430070, People's Republic of China
*
Corresponding author: L. Wu Email: ruochen143abc@163.com
Rights & Permissions [Opens in a new window]

Abstract

With quad-band-notched characteristic, a compact ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is introduced in the paper. The UWB–MIMO system has two similar monopole elements and occupies 30 × 45 mm2. By inserting two L-shaped slots, CSRR and C-shaped stubs, four notched bands are achieved (3.25–3.9, 5.11–5.35, 5.5–6.06, and 7.18–7.88 GHz) to filter WiMAX, lower WLAN, upper WLAN, and X-band. Meanwhile, the isolation is obviously enhanced with three metal strips on the ground plane. Results indicate that the antenna covers UWB frequency band of 3.1 – 10.6 GHz except four rejected bands, isolation of better than −18 dB, envelope correlation coefficient of <0.02, and good radiation pattern, thus making it useful for UWB systems.

Information

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2016 
Figure 0

Fig. 1.(a) Sketch of the proposed antenna and (b) fabricated antenna.

Figure 1

Table 1.Comparison of calculated and simulated total length.

Figure 2

Fig. 2.S21 when number of the strips varies.

Figure 3

Fig. 3.Surface current distributions on the radiating patch, (a) with strips and (b) without strips.

Figure 4

Fig. 4.Simulated S11: (a) effects of L1; (b) effects of R2 and R3; (c) effects of L5.

Figure 5

Fig. 5.Surface current distributions when port 1 is excited: (a) 3.5 GHz; (b) 5.25 GHz; (c) 5.8 GHz; (d) 7.5 GHz.

Figure 6

Fig. 6.Simulated and measured S11 of the proposed antenna.

Figure 7

Fig. 7.Simulated and measured S21 of the proposed antenna.

Figure 8

Fig. 8.Measured normalized far-field radiation patterns for port 1; (a) the y–z plane (E-plane); (b) the x–z plane (H-plane).

Figure 9

Fig. 9.Measured ECC of the proposed antenna.

Figure 10

Fig. 10.Antenna gain and radiation efficiency.

Figure 11

Table 2.Comparisons of the antenna and other UWB–MIMO systems.