Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T09:28:22.413Z Has data issue: false hasContentIssue false

Dual-polarized unit cell for liquid crystal reconfigurable intelligent surface based on defected delay lines

Published online by Cambridge University Press:  26 December 2025

Robin Neuder*
Affiliation:
Institute of Microwave Engineering and Photonics, Technische Universität Darmstadt, Darmstadt, Germany
Ana Díaz-Rubio
Affiliation:
Nanophotonics Technology Center, Universitat Politècnica de València, València, Spain
Yingzhe Liu
Affiliation:
Institute of Microwave Engineering and Photonics, Technische Universität Darmstadt, Darmstadt, Germany
Nora Dzieia
Affiliation:
Institute of Microwave Engineering and Photonics, Technische Universität Darmstadt, Darmstadt, Germany
Dongwei Wang
Affiliation:
Institute of Microwave Engineering and Photonics, Technische Universität Darmstadt, Darmstadt, Germany
Alejandro Jiménez-Sáez
Affiliation:
Institute of Microwave Engineering and Photonics, Technische Universität Darmstadt, Darmstadt, Germany
*
Corresponding author: Robin Neuder; Email: robin.neuder@tu-darmstadt.de
Rights & Permissions [Opens in a new window]

Abstract

This paper presents the design and characterization of a unit cell for dual-polarized liquid crystal (LC)-based reconfigurable intelligent surfaces (RIS), as well as an efficient, full-wave simulation methodology for the far-field beam-steering capabilities of large-scale LC-RIS. Within this framework, the unit cell relies on defected delay lines with a 4.6 μm thin LC layer aperture coupled to a patch antenna. This delay line architecture aims towards simultaneous optimization of loss, bandwidth and response time. Full-wave simulations of the unit cell in a periodic environment show an operating frequency between 26.5 and 29.5 GHz with wide angle radiation. Measurements of the unit cell in a 3 $\times$ 3 rectangular grid exhibit wideband impedance matching and overall good agreement with simulations. Furthermore, a simulation methodology is introduced that evaluates large-scale LC-RIS far-field beam-steering capabilities without requiring full-wave simulations of the entire structure, but just few unit cells. Within this scope, the LC-RIS achieves a maximum efficiency of 20.8% with a beam-steering range from −48° to +48°, despite the use of a lossy glass substrate and gold as a conductor. It exhibits a minimum bandwidth of 8.2% for an efficiency of at least 10% across all analyzed steering angles in E-Plane and H-Plane.

Information

Type
Research Paper
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0), which permits unrestricted re-use, distribution and reproduction, provided the original article is properly cited.
Copyright
© The Author(s), 2025. Published by Cambridge University Press in association with The European Microwave Association.
Figure 0

Figure 1.Exemplary outdoor scenario for a RIS. The different colors in the RIS qualitatively indicate different reflected phase at the radiating elements. LoS: Line-of-sight.

Figure 1

Figure 2.Unit cell characterization in simulations. (a) The perspective view of a 3 $\times$ 3 cut-out of a RIS and the side view of a tunable LC delay line coupled to a radiating element as well as the proposed dual-polarized LC-RIS unit cell. (b) The impedance matching of a unit cell, while (c)–(e) display its normalized radiation patterns.

Figure 2

Figure 3.Unit cell characterization in measurements. (a) The fabricated sample from top and bottom view as well as the measurement setup. (b and c) The measured impedance matching at port 1 and port 2 and the radiation pattern of the sample, respectively.

Figure 3

Figure 4.Evaluation of unit cell phase shift with regard to the applied liquid crystal permittivity. On the left, the simulation setup is shown. ${Z_{\mathrm{max}}}$ and Port 1 are the two simulation ports for excitation and reception of the electromagnetic modes. The black arrow attached to the ${Z_\mathrm{{max}}}$ port indicates its orientation.

Figure 4

Figure 5.Efficiency calculation of the infinite size metasurface using Floquet-mode theory. (a) Representation of the simulation setup. (b) Exemplary excitation modes for the provided example corresponding to the specular mode and the first diffracted mode. (c) Co-polarization efficiency and cross-polarization losses for the 4 element unit cell steering towards the first diffracted mode. The acronyms neg. and pos. correspond to a steering towards the negative ${\theta}$ and the positive ${\theta}$ direction, respectively, corresponding to $\theta_{{r},1} = \pm28^{\circ}$ at $28\,\mathrm{GHz}$.

Figure 5

Table 1.Calculation of reflection angles $\theta_{r,n}$ for different supercell sizes at $28\,\mathrm{GHz}$

Figure 6

Figure 6.Efficiency calculation for a finite size reconfigurable intelligent surface composed of the proposed dual-polarized liquid crystal-based unit cell. (a) The radiated far-field pattern of an unit cell with one element. (b) The radiated far-field pattern of a $D_\mathrm{SC} = 4\, N$ supercell with an inter-element phase shift of $90^{\circ}$. (c) The radiated far-field pattern of 1296 (36 $\times$ 36) elements, accomplished by multiplication of (b) with the array factor. The red-yellow-white (hot) color grading marks the intensity of the radiated electric field. The green color grading indicates the applied liquid crystal permittivity. Note: In the setup, the ground plane has been hidden to make the liquid crystal layer visible. (d and g) The broadband performance in terms of the steering efficiency in a heat map for the E-plane and the H-plane, respectively. (e and h) as well as (f and i) The results of the co-polarization efficiency ${\eta_\mathrm{Co}}$ and the cross-polarization loss $\mathrm{L_{Cross}}$ for the E-plane and the H-plane.

Figure 7

Table 2.Summary of dual-polarized LC-RIS unit cell performance