Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:57:22.929Z Has data issue: false hasContentIssue false

Efficient modeling of a two-terminal polarization convertor–loaded dielectric-built filtenna using ML algorithms

Published online by Cambridge University Press:  03 November 2025

Abhishek Kumar*
Affiliation:
Department of Electronics and Communication Engineering, Ravindranath Tagore University, Bhopal, MP, India
Jitendra Ahir
Affiliation:
Department of Electronics and Communication Engineering, Ravindranath Tagore University, Bhopal, MP, India
Sanjeev Kumar Gupta
Affiliation:
Department of Electronics and Communication Engineering, Ravindranath Tagore University, Bhopal, MP, India
*
Corresponding author: Abhishek Kumar; Email: abhishekphdrntu@gmail.com
Rights & Permissions [Opens in a new window]

Abstract

In this study, a metasurface (MS) polarization converter combined with a two-port dielectric antenna is constructed and studied. The feeding configuration, which consists of a printed line connected to an aperture, offers built-in filtering capabilities. In addition to converting linear to circular polarization between 2.49 and 3.25 GHz, the suspended MS layer enhances port isolation to less than −20 dB. In addition, the suggested radiator’s |S11| is projected using the Random Forest and XGBoost machine learning (ML) models, which demonstrate satisfactory agreement with simulation data. The antenna effectively functions over 2.33–3.35 GHz, demonstrating that it is a leading contender for sub-6 GHz 5G communication systems. Fabricated measurements support both simulation and ML predictions.

Information

Type
Research Paper
Copyright
© The Author(s), 2025. Published by Cambridge University Press in association with The European Microwave Association.
Figure 0

Figure 1.Design of the intended two-terminal antenna. (a) Feeding configuration. (b) Dielectric radiator. (c) MS layout. (d) Adjacent radiator sight.

Figure 1

Table 1.Optimum measurements of the planned two-terminal antenna’s various components

Figure 2

Figure 2.Curve of |S11| showing different changes to the solo terminal radiator’s feed.

Figure 3

Figure 3.E-field patterns at 2.55 GHz on ceramic. (a) Upper sight. (b) Side sight.

Figure 4

Figure 4.Curve of gain with several changes in the feed line.

Figure 5

Figure 5.Curve of S-parameter with a solo/two-terminal antenna.

Figure 6

Figure 6.Curve of permittivity/permeability for the suggested unit cell.

Figure 7

Figure 7.Curve of S-parameter presence and absence of MS.

Figure 8

Figure 8.Curve of AR with and w/o MS.

Figure 9

Figure 9.Curve of gain with and w/o MS.

Figure 10

Table 2.Evaluation of design in light of |S11| performance standards

Figure 11

Figure 10.Comparison between expected and actual results ∣Տ11∣. (a) XGBoost. (b) RF model.

Figure 12

Figure 11.Images of the radiator archetype. (a) Feed assembly. (b) MS model. (c) Isometric sight.

Figure 13

Figure 12.Tested/Simulated/Projected S-parameter curve.

Figure 14

Figure 13.Tested/Simulated AR curve.

Figure 15

Figure 14.Polar graph of LHCP/RHCP at 2.7 GHz. (a) Port-1. (b) Port-2.

Figure 16

Figure 15.Tested/Simulated gain curve.

Figure 17

Table 3.Performance assessment of the proposed radiator against existing MIMO designs

Figure 18

Figure 16.Measured/Simulated ECC/DG graph.