Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T20:31:58.727Z Has data issue: false hasContentIssue false

Wideband and high-gain circularly-polarized L-shaped slot antenna array using metamaterial

Published online by Cambridge University Press:  02 July 2020

Qiang Chen*
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Guolin Zhang
Affiliation:
School of Mathematical and Computer Science, Yichun University, Yichun, Jiangxi 336000, China
Changhui He
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Ya Fan
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Zhenbo Zhu
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Di Zhang
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Jing Li
Affiliation:
Air Force Early Warning Academy, Wuhan, Hubei 430019, China
Yuanqing Zhao
Affiliation:
The 93552 Troop of Chinese People's Liberation Army, Shijiazhuang, China
*
Author for correspondence: Qiang Chen, E-mail: cqky1989@126.com
Rights & Permissions [Opens in a new window]

Abstract

This research involves a compact wideband circularly-polarized antenna array, which consists of a sequential rotating phase feed network, 2 × 2 mushroom-type metamaterial (MTM) unit, and so on. Each antenna array unit contains a microstrip feedline, an L-shaped slot antenna, and so on. The MTM-based antennas were incorporated with a sequential-phase network of sequentially rotated series-parallel feed to achieve wideband operation. The operational bandwidth and the radiation model in the high-frequency area were improved through the adjustment of spacing between the L-shaped slots while maintaining the size and structure of the MTM. The proposed design had dimensions of 80 mm × 80 mm × 3.5 mm (~1.64 λ0 × 1.64 λ0 × 0.072 λ0 at 6.15 GHz), and it was simulated, fabricated, and tested.

Information

Type
Metamaterials and Photonic Bandgap Structures
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2020
Figure 0

Fig. 1.Geometry of the CP MTM-based antenna array; (a) side and top views, and (b) geometry of feeding network.

Figure 1

Table 1.The optimal dimensions of the proposed antenna

Figure 2

Fig. 2.(a) Geometry of the single factor, (b) dispersion diagram of the graphical solution, and the MTM structure of equation (1) for different numbers of unit cells.

Figure 3

Fig. 3.Various configurations of microstrip-fed L-shaped slot antennas; (a) without MTM superstrate and (b) with MTM superstrate.

Figure 4

Fig. 4.AR and simulated reflection coefficients of various antenna designs; (a) S11 and (b) AR.

Figure 5

Fig. 5.Configuration of the metasurface-based L-shaped slot antenna array.

Figure 6

Fig. 6.Simulated outcomes for various kinds of L-shaped slot antennas with MTM superstrate and with MS superstrate: (a) |S11| and (b) AR and broadside gain.

Figure 7

Fig. 7.Simulated outcomes of the suggested array antenna for different distances between the L-shaped slots: (a) |S11| and (b) AR and gain.

Figure 8

Fig. 8.Fabrication of the proposed antenna array.

Figure 9

Fig. 9.Real-world and simulation results: (a) |S11| and (b) axial ratio and broadside gain.

Figure 10

Fig. 10.Simulation and real-world radiation models of the proposed array at (a) 5.5 GHz, (b) 6.5 GHz, and (c) 7.3 GHz.

Figure 11

Table 2.Performance comparison of the proposed design and other MTM-based antenna arrays