Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T03:32:58.699Z Has data issue: false hasContentIssue false

The capillary instability of annular layers and liquid threads

Published online by Cambridge University Press:  26 April 2006

Lori A. Newhouse
Affiliation:
Department of Applied Mechanics and Engineering Sciences, 0411, University of California, San Diego, La Jolla, CA 92093, USA
C. Pozrikidis
Affiliation:
Department of Applied Mechanics and Engineering Sciences, 0411, University of California, San Diego, La Jolla, CA 92093, USA

Abstract

The capillary instability and break-up of an annular liquid layer coating the inner surface of a cylindrical tube while surrounding another core fluid is studied. In the limiting case where the thickness of the layer is almost equal to the radius of the tube, we obtain a thread of core fluid suspended in a virtually unbounded ambient liquid. The evolution of a layer or thread with a cylindrical or unduloidal interface subject to an axisymmetric perturbation is computed using a boundary integral method. It is shown that for large and moderate layer thicknesses the instability causes the core to transform into an alternating array of primary and secondary spherical drops along the centreline of the tube. The relative volume of the drops depends primarily on the ratio of the core radius to the tube radius, a/R, and the type of initial perturbation. The evolution of thin layers with a/R > 0.82 leads to formation of an array of lobes or collars. These results are used to assess the accuracy of previous approximate analyses based on lubrication flow and minimization of interfacial area.

Information

Type
Research Article
Copyright
© 1992 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable