Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T08:09:45.046Z Has data issue: false hasContentIssue false

The flow over a backward-facing step under controlled perturbation: laminar separation

Published online by Cambridge University Press:  26 April 2006

M. A. Z. Hasan
Affiliation:
Mechanical Engineering Department, King Fahd University of Petroleum & Minerals. Dhahran 31261, Saudi Arabia

Abstract

The flow over a backward-facing step with laminar separation was investigated experimentally under controlled perturbation for a Reynolds number of 11000, based on a step height h and a free-stream velocity UO. The reattaching shear layer was found to have two distinct modes of instability: the ‘shear layer mode’ of instability at Stθ ≈ 0.012 (Stθ ≡ fθ/UO, θ being the momentum thickness at separation and f the natural roll-up frequency of the shear layer); and the ‘step mode’ of instability at Sth ≈ 0.185 (Sth ≡ fh/U0). The shear layer instability frequency reduced to the step mode one via one or more stages of a vortex merging process. The perturbation increased the shear layer growth rate and the turbulence intensity and decreased the reattachment length compared to the unperturbed flow. Cross-stream measurements of the amplitudes of the perturbed frequency and its harmonics suggested the splitting of the shear layer. Flow visualization confirmed the shear layer splitting and showed the existence of a low-frequency flapping of the shear layer.

Information

Type
Research Article
Copyright
© 1992 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable