Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T11:54:37.630Z Has data issue: false hasContentIssue false

Simulation of blunt-fin-induced shock-wave and turbulent boundary-layer interaction

Published online by Cambridge University Press:  20 April 2006

Ching-Mao Hung
Affiliation:
Computational Fluid Dynamics Branch, NASA Ames Research Center, Moffett Field, California
Pieter G. Buning
Affiliation:
Computational Fluid Dynamics Branch, NASA Ames Research Center, Moffett Field, California

Abstract

The Reynolds-averaged Navier–Stokes equations are solved numerically for supersonic flow over a blunt fin mounted on a flat plate. The fin shock causes the boundary layer to separate, which results in a complicated, three-dimensional shock-wave and boundary-layer interaction. The computed results are in good agreement with the mean static pressure measured on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak on the plate, are predicted well. The role of the horseshoe vortex is discussed. This vortex leads to the development of high-speed flow and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and, therefore, the spatial extent of the interaction are dominated by inviscid flow and only weakly dependent on the Reynolds number. Coloured graphics are used to show details of the interaction flow field.

Information

Type
Research Article
Copyright
© 1985 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable