Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T06:14:23.036Z Has data issue: false hasContentIssue false

Transition in a two-dimensional plane wall jet

Published online by Cambridge University Press:  29 March 2006

R. A. Bajura
Affiliation:
Department of Mechanical Engineering and Mechanics, West Virginia University, Morgantown, West Virginia 26506
M. R. Catalano
Affiliation:
Department of Mechanical Engineering and Mechanics, West Virginia University, Morgantown, West Virginia 26506Present address: Engineering Division, Rohm-Haas Company, Bristol, Pa. 19007.

Abstract

Transition in a two-dimensional plane wall jet was examined for the range of exit Reynolds numbers between 100 and 600. The wall jet was produced by the flow of water, which issued either from a smoothly-contoured nozzle or from the end of a long parallel channel. Observations were recorded both visually and with a hot-film anemometer. Both natural and forced transition cases were studied. Natural transition generally occurred in the following stages: (i) formation of discrete vortices in the outer shear layer; (ii) coalescence of adjacent vortices in the outer shear layer, coupled with the rolling up of the inner shear layer; (iii) eruption of the wall jet off the surface of the flat plate into the ambient fluid; (iv) dispersion of the organized flow pattern by three-dimensional turbulent motions; and (v) re-laminarization of the upstream flow, until another vortex pairing occurred. The initial stages of transition are two-dimensional in nature; and are dominated by the mechanism of vortex pairing, which is commonly observed in free shear layers. The inner-region shear layer exerts a stabilizing influence on the velocity profile at low Reynolds numbers. Forced transition was essentially similar to natural transition, except for the elimination of the downstream intermittency and the establishment of a fixed downstream location for transition.

Information

Type
Research Article
Copyright
© 1975 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable