Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T10:16:38.334Z Has data issue: false hasContentIssue false

Vortex shedding from a rectangular prism and a circular cylinder placed vertically in a turbulent boundary layer

Published online by Cambridge University Press:  20 April 2006

Hiroshi Sakamoto
Affiliation:
Department of Mechanical Engineering, Kitami Institute of Technology, Kitami, 090, Japan
Mikio Arie
Affiliation:
Hokkaido University, Sapporo, 060, Japan

Abstract

Measurements of the vortex-shedding frequency behind a vertical rectangular prism and a vertical circular cylinder attached to a plane wall are correlated with the characteristics of the smooth-wall turbulent boundary layer in which they are immersed. Experimental data were collected to investigate the effects of (i) the aspect ratio of these bodies and (ii) the boundary-layer characteristics on the vortex-shedding frequency. The Strouhal number for the rectangular prism and the circular cylinder, defined by S = fcw/U0 and fcd/U0 respectively, was found to be expressed by a power function of the aspect ratio h/w (or h/d). Here fc is the vortex-shedding frequency, U0 is the free-stream velocity, h is the height, w is the width and d is the diameter. As the aspect ratio is reduced, the type of vortex shedding behind each of the two bodies was found to change from the Karman-type vortex to the arch-type vortex at the aspect ratio of 2·0 for the rectangular prism and 2·5 for the circular cylinder.

Information

Type
Research Article
Copyright
© 1983 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable