Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T11:24:34.405Z Has data issue: false hasContentIssue false

Apex jets from impacting drops

Published online by Cambridge University Press:  16 October 2008

J. O. MARSTON
Affiliation:
A*STAR Institute of Chemical and Engineering Sciences, 1 Pesek Road, Jurong Island, Singapore 627833
S. T. THORODDSEN
Affiliation:
Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We present experiments showing vertical jetting from the apex of a viscous drop which impacts onto a pool of lower viscosity liquid. This jet is produced by the ejecta sheet which emerges from the free surface of the pool, and moves up and wraps around the surface of the drop. When this sheet of liquid converges and collides at the top apex of the drop it produces a thin upward jet at velocities of more than 10 times the drop impact velocity. This jetting occurs for a limited range of impact conditions, where the ejecta speed is sufficient for the sheet to travel around the entire drop periphery, but not so fast that it separates from the drop surface. The lower bound for the jetting region is thereby set by a minimal Reynolds number, but the upper bounds are subject to a maximum-Weber-number criterion. The strongest observed jets appear for viscous drops impacting onto liquid pools with the lowest viscosity as well as lowest surface tension, such as acetone and methanol. Jetting has also been observed for drops which are immiscible with the pool liquid, under a different range of impact conditions. However, jetting is never observed for pools of water, as the surface tension is then significantly larger than that of the drop. We believe that Marangoni stresses act in this case to promote separation of the sheet to prevent the jetting. A movie is available with the online version of the paper.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2008

Marston and Thoroddsen supplementary movie

Movie 1. A high-speed video clip, showing the formation of an apex jet when a 4.1mm glycerin drop impacts onto a low-viscosity, low-surface-tension pool of methanol at 1.85m/s.  The corresponding Reynolds number is 10100 and Weber number is 490.  Frame rate is 12500 fps.

Download Marston and Thoroddsen supplementary movie(Video)
Video 5.9 MB