Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T13:45:19.844Z Has data issue: false hasContentIssue false

Boundary-layer analysis of the thermal bar

Published online by Cambridge University Press:  26 April 2006

Anthony Kay
Affiliation:
Loughborough University of Technology, Loughborough, Leicestershire, LE11 3TU, UK
H. K. Kuiken
Affiliation:
University of Leeds, Leeds, LS2 9JT, UK
J. H. Merkin
Affiliation:
University of Leeds, Leeds, LS2 9JT, UK

Abstract

The thermal bar, a descending plane plume of fluid at the temperature of maximum density (3.98° C in water), is analysed as a laminar free-convection boundary layer, following the example of Kuiken & Rotem (1971) for the plume above a line source of heat. Numerical integration of the similarity form of the boundary-layer equations yields values of the vertical velocity and temperature gradient on the centre line and the horizontal velocity induced outside the thermal bar as functions of Prandtl number σ. The asymptotic behaviour of these parameters for both large and small σ is also obtained; in these cases, the thermal bar has a two-layer structure, and the method of matched asymptotic expansions is used. For the intermediate case σ= 1, an analytical calculation using approximate velocity and temperature profiles in the integrated boundary-layer equations yields good agreement with the numerical results. The applicability of the results to naturally occurring thermal bars (e. g. in lakes) is limited, but the laminar-flow analysis is likely to relate more closely to the phenomenon on a laboratory scale.

Information

Type
Research Article
Copyright
© 1995 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable