Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:17:29.836Z Has data issue: false hasContentIssue false

Boundary-layer transition on a rotating cone in still fluid

Published online by Cambridge University Press:  20 April 2006

R. Kobayashi
Affiliation:
Institute of High Speed Mechanics, Tohoku University, Sendai, Japan
H. Izumi
Affiliation:
Asahi Glass Co. Ltd, Yokohama, Japan

Abstract

A linear stability analysis and experiments were carried out for the laminar–turbulent transition of three-dimensional incompressible boundary layers induced on the surface of a cone rotating around the axis of symmetry with constant angular speed in still fluid. Five cones having total angle of 30°–150° were tested. The results show that the critical and transition Reynolds numbers, the direction of spiral vortices appearing in the transition region and their number on a cone increase as the cone angle is increased, and they tend to the values for the case of a rotating disk. Flow visualizations were made for the transitional process and also for cross-sectional flows of spiral vortices.

Information

Type
Research Article
Copyright
© 1983 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable