Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T02:24:47.486Z Has data issue: false hasContentIssue false

Closed-loop control of unsteadiness over a rounded backward-facing step

Published online by Cambridge University Press:  12 June 2012

Alexandre Barbagallo
Affiliation:
ONERA – The French Aerospace Lab, 8 rue des Vertugadins, 92190 Meudon, FranceLaboratoire d’Hydrodynamique (LadHyX), CNRS – Ecole Polytechnique, 91128 Palaiseau, France
Gregory Dergham
Affiliation:
DynFluid Laboratory, Arts et Metiers ParisTech, 151 Boulevard de l’Hôpital, 75013 Paris, France
Denis Sipp
Affiliation:
ONERA – The French Aerospace Lab, 8 rue des Vertugadins, 92190 Meudon, France
Peter J. Schmid*
Affiliation:
Laboratoire d’Hydrodynamique (LadHyX), CNRS – Ecole Polytechnique, 91128 Palaiseau, France
Jean-Christophe Robinet
Affiliation:
DynFluid Laboratory, Arts et Metiers ParisTech, 151 Boulevard de l’Hôpital, 75013 Paris, France
*
†Email address for correspondence: peter@ladhyx.polytechnique.fr
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The two-dimensional, incompressible flow over a rounded backward-facing step at Reynolds number $\mathit{Re}= 600$ is characterized by a detachment of the flow close to the step followed by a recirculation zone. Even though the flow is globally stable, perturbations are amplified as they are convected along the shear layer, and the presence of upstream random noise renders the flow unsteady, leading to a broadband spectrum of excited frequencies. This paper is aimed at suppressing this unsteadiness using a controller that converts a shear-stress measurement taken from a wall-mounted sensor into a control law that is supplied to an actuator. A comprehensive study of various components of closed-loop control design – covering sensor placement, choice and influence of the cost functional, accuracy of the reduced-order model, compensator stability and performance – shows that successful control of this flow requires a judicious balance between estimation speed and estimation accuracy, and between stability limits and performance requirements. The inherent amplification behaviour of the flow can be reduced by an order of magnitude if the above-mentioned constraints are observed. In particular, to achieve superior controller performance, the estimation sensor should be placed upstream near the actuator to ensure sufficient estimation speed. Also, if high-performance compensators are sought, a very accurate reduced-order model is required, especially for the dynamics between the actuator and the estimation sensor; otherwise, very minute errors even at low energies and high frequencies may render the large-scale compensated linearized simulation unstable. Finally, coupling the linear compensator to nonlinear simulations shows a gradual deterioration in control performance as the amplitude of the noise increases.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2012

Barbagallo et al. supplementary movie

Animation of control of flow over a backward-facing step

Download Barbagallo et al. supplementary movie(Video)
Video 9.1 MB

Barbagallo et al. supplementary movie

Animation of control of flow over a backward-facing step

Download Barbagallo et al. supplementary movie(Video)
Video 44.9 MB