Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T05:31:52.829Z Has data issue: false hasContentIssue false

Coupled lattice Boltzmann method–discrete element method model for gas–liquid–solid interaction problems

Published online by Cambridge University Press:  20 November 2023

Linlin Fei
Affiliation:
Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich), Zürich 8092, Switzerland
Feifei Qin*
Affiliation:
Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich), Zürich 8092, SwitzerlandInstitute of Extreme Mechanics and School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, PR China
Geng Wang
Affiliation:
Department of Mechanical Engineering, University College London, Torrington Place, London WC1E 7JE, UK
Jingwei Huang
Affiliation:
Department of Petroleum Engineering, China University of Geosciences (Wuhan), Wuhan, PR China
Binghai Wen
Affiliation:
Guangxi Key Lab of Multi-Source Information Mining & Security, Guangxi Normal University, Guilin 541004, PR China
Jianlin Zhao
Affiliation:
Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich), Zürich 8092, SwitzerlandCollege of Petroleum Engineering, China University of Petroleum in Beijing, PR China
Kai H. Luo
Affiliation:
Department of Mechanical Engineering, University College London, Torrington Place, London WC1E 7JE, UK
Dominique Derome
Affiliation:
Department of Civil and Building Engineering, Université de Sherbrooke, Sherbrooke, QC, Canada
Jan Carmeliet
Affiliation:
Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich), Zürich 8092, Switzerland
*
†Email address for correspondence: fqin@nwpu.edu.cn

Abstract

In this paper, we propose a numerical model to simulate gas–liquid–solid interaction problems, coupling the lattice Boltzmann method and discrete element method (LBM–DEM). A cascaded LBM is used to simulate the liquid–gas flow field using a pseudopotential interaction model for describing the liquid–gas multiphase behaviour. A classical DEM resorting to fictitious overlaps between the particles is used to simulate the multiple-solid-particle system. A multiphase fluid–solid two-way coupling algorithm between LBM and DEM is constructed. The model is validated by four benchmarks: (i) single disc sedimentation, (ii) single floating particle on a liquid–gas interface, (iii) sinking of a horizontal cylinder and (iv) self-assembly of three particles on a liquid–gas interface. Our simulations agree well with the numerical results reported in the literature. Our proposed model is further applied to simulate droplet impact on deformable granular porous media at pore scale. The dynamic droplet spreading process, the deformation of the porous media (composed of up to 1277 solid particles) as well as the invasion of the liquid into the pores are well captured, within a wide range of impact Weber number. The droplet spreading dynamics on particles is analysed based on the energy budget, which reveals mechanisms at play, showing the evolution of particle energy, surface energy and viscous dissipation energy. A scaling relation based on the impact Weber number is proposed to describe the maximum spreading ratio.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press.
Figure 0

Figure 1.Illustration of the interaction between particles a and b.

Figure 1

Figure 2.Illustration of fluid–solid interactions and the curved boundary scheme. The solid line connected by wall points represents the boundary of particle a.

Figure 2

Figure 3.Illustration of refilling scheme.

Figure 3

Figure 4.Illustration of single-disc sedimentation problem.

Figure 4

Figure 5.Single-disc sedimentation at $Re=3.23$. Time-dependent (a) trajectories, (b) angular velocities, (c) horizontal velocities and (d) vertical velocities.

Figure 5

Figure 6.Single-disc sedimentation at $Re=8.33$. Time-dependent (a) trajectories, (b) angular velocities, (c) horizontal velocities and (d) vertical velocities.

Figure 6

Figure 7.Illustration of single particle floating on the liquid–gas interface.

Figure 7

Figure 8.Evolution of a floating solid particle (in white) at the liquid–gas interface (liquid phase: in red; gas phase: in blue): (a–d) $\phi = 1.25$, $\delta \rho = 0.0$; (e–h) $\phi = 1.0$, $\delta \rho = 0.0$; (i–l) $\phi = 1.0$, $\delta \rho = 0.3$.

Figure 8

Figure 9.(a) Transient vertical location of a solid particle floating at the liquid–gas interface. (b) Comparison between the contact angles measured from a floating particle (${\theta _1}$: top left inset) and a static droplet sitting on a fixed particle (${\theta _2}$: bottom right inset).

Figure 9

Figure 10.Geometry set-up of the sinking of a cylinder from the liquid–gas interface.

Figure 10

Figure 11.Snapshots of the sinking process at different time frames. (a) Experimental results from Vella et al. (2006) and (b) the corresponding simulation results of the present model.

Figure 11

Figure 12.Quantitative comparison between experiments (Vella et al.2006) and the present LBM–DEM simulations. (a) Time evolution of the cylinder's centre and (b) time evolution of the angle between the contact line and the vertical direction.

Figure 12

Figure 13.Geometry set-up of the self-assembly of three hydrophilic particles on a liquid–gas interface.

Figure 13

Figure 14.Snapshots of the three-particle self-assembly process on a liquid–gas interface.

Figure 14

Figure 15.Evolution of normalized three-particle centres in the horizontal direction (a) and vertical direction (b) during their self-assembly process on a liquid–gas interface.

Figure 15

Figure 16.A schematic diagram of droplet impact on a deformable porous medium.

Figure 16

Table 1.Numerical set-up for droplet impact on deformable porous media.

Figure 17

Figure 17.Evolution of droplet impact on a deformable porous medium at $We=4.4$: (a,c,e,g,i,k) $\theta = {90^ \circ }$ (supplementary movie 1 available at https://doi.org/10.1017/jfm.2023.822) and (b,d,f,h,j,l) $\theta = {60^ \circ }$ (supplementary movie 2).

Figure 18

Figure 18.Evolution of droplet impact on a deformable porous medium at $We=33.6$: (a,c,e,g,i,k) $\theta = {90^ \circ }$ (supplementary movie 3) and (b,d,f,h,j,l) $\theta = {60^ \circ }$ (supplementary movie 4).

Figure 19

Figure 19.Evolution of droplet impact on a deformable porous medium at $We=151.3$: (a,c,e,g,i,k) $\theta = {90^ \circ }$ (supplementary movie 5) and (b,d,f,h,j,l) $\theta = {60^ \circ }$ (supplementary movie 6).

Figure 20

Figure 20.Temporal evolution of the spreading length D following a droplet impact upon the deformable porous medium: (a) $\theta = {90^ \circ }$ and (b) $\theta = {60^ \circ }$.

Figure 21

Figure 21.Time evolution of energy contributions (total energy, ${E_t}$; dissipation energy, ${E_d}$; surface energy, ${E_s}$; droplet kinetic energy, ${E_k}$; particle energy, ${E_p}$) during spreading of droplet impact upon deformable porous medium. (a–c) For $\theta = {90^ \circ }$ and $We=4.5$, 33.6 and 151.3, respectively. (d–f) For $\theta = {60^ \circ }$ and $We=4.5$, 19.3 and 151.3, respectively. All frames share the legend.

Figure 22

Figure 22.Proportion of four energy terms (droplet kinetic energy, ${E_k}$; dissipation energy, ${E_d}$; surface energy, ${E_s}$; particle energy, ${E_p}$) at maximum spreading as a function of impact velocity: (a) $\theta = {90^ \circ }$ and (b) $\theta = {60^ \circ }$.

Figure 23

Figure 23.Rescaled maximum spreading ratio as a function of the Weber number. The dashed line is the prediction by (4.3) with fitting parameters ${k_1} = 3.11$ and ${k_2} = 34.39$.

Figure 24

Figure 24.Evolution of droplet impacting on a deformable porous medium at ${Re}=500$.

Fei et al. Supplementary Movie 1

Droplet impact on a deformable porous medium at Re=240 and We=4.4 with contact angle θ=90°.

Download Fei et al. Supplementary Movie 1(Video)
Video 1.8 MB

Fei et al. Supplementary Movie 2

Droplet impact on a deformable porous medium at Re=240 and We=4.4 with contact angle θ=60°.

Download Fei et al. Supplementary Movie 2(Video)
Video 1.8 MB

Fei et al. Supplementary Movie 3

Droplet impact on a deformable porous medium at Re=240 and We=33.6 with contact angle θ=90°.

Download Fei et al. Supplementary Movie 3(Video)
Video 1.4 MB

Fei et al. Supplementary Movie 4

Droplet impact on a deformable porous medium at Re=240 and We=33.6 with contact angle θ=60°.

Download Fei et al. Supplementary Movie 4(Video)
Video 1.6 MB

Fei et al. Supplementary Movie 5

Droplet impact on a deformable porous medium at Re=240 and We=151.3 with contact angle θ=90°.

Download Fei et al. Supplementary Movie 5(Video)
Video 1.3 MB

Fei et al. Supplementary Movie 6

Droplet impact on a deformable porous medium at Re=240 and We=151.3 with contact angle θ=60°.
Download Fei et al. Supplementary Movie 6(Video)
Video 1.3 MB

Fei et al. Supplementary Movie 7

Droplet impact on a deformable porous medium at Re=500 and We=250 with contact angle θ=60°.

Download Fei et al. Supplementary Movie 7(Video)
Video 2.4 MB