Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T21:40:58.176Z Has data issue: false hasContentIssue false

Designing vortices in pipe flow with topography-driven Langmuir circulation

Published online by Cambridge University Press:  06 September 2021

Simen Å. Ellingsen*
Affiliation:
Department of Energy and Process Engineering, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
Andreas H. Akselsen
Affiliation:
Department of Energy and Process Engineering, Norwegian University of Science and Technology, N-7491 Trondheim, NorwaySINTEF Ocean, Marinteknisk senter, N-7052 Trondheim, Norway
Leon Chan
Affiliation:
Department of Mechanical Engineering, The University of Melbourne, Victoria 3010, Australia
*
†Email address for correspondence: simen.a.ellingsen@ntnu.no

Abstract

We present direct numerical simulation of a mechanism for creating longitudinal vortices in pipe flow, compared with a model theory. By furnishing the pipe wall with a pattern of crossing waves, secondary flow in the form of streamwise vortex pairs is created. The mechanism, ‘CL1’, is kinematic and known from oceanography as a driver of Langmuir circulation. CL1 is strongest when the ‘wall wave’ vectors make an acute angle with the axis, $\varphi =10^{\circ }$–$20^{\circ }$, changes sign near $45^{\circ }$ and is weak and of opposite sign beyond this angle. A competing, dynamic mechanism driving secondary flow in the opposite sense is also observed, created by the azimuthally varying friction. Whereas at smaller angles ‘CL1’ prevails, the dynamic effect dominates when $\varphi \gtrsim 45^{\circ }$, reversing the flow. Curiously, the circulation strength is a faster-than-linearly increasing function of Reynolds number for small $\varphi$. We explore an analogy with Prandtl's secondary motion of the second kind in turbulence. A transport equation for average streamwise vorticity is derived, and we analyse it for three different crossing angles, $\varphi =18.6^{\circ }, 45^{\circ }$ and $60^{\circ }$. Mean-vorticity production is organised in a ring-like structure with the two rings contributing to rotating flow in opposite senses. For the larger $\varphi$, the inner ring decides the main swirling motion, whereas for $\varphi =18.6^{\circ }$, outer-ring production dominates. For the larger angles, the outer ring is mainly driven by advection of vorticity and the inner by deformation (stretching) whereas, for $\varphi =18.6^{\circ }$, both contribute approximately equally to production in the outer ring.

Information

Type
JFM Papers
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.(a) Pipe geometry for $m_1=3, \kappa=(k_1^2 + m_1^2)^{1/2} =5$; crestlines (dash-dot) and saddle-point lines (dash) are shown; (b) geometry and parameters used in § 2. m1 and k1 are, respectively, the azimuthal and streamwise wave numbers of the imprinted ‘wall-wave’ pattern, nondimensionalised with pipe radius.

Figure 1

Figure 2.Theoretical predictions. (a) Circulation intensity for fixed $\kappa$ as a function of phase angle $\varphi$; $\delta ^{*}=0.05$. Only design configurations for which $m$ is an integer are realisable; these are marked with dashed vertical lines where $m_1$ values are marked as integers. (b–d) Streamlines in the cross-flow plane for $m\in \{1,2,3\}$ and $\kappa ={\rm \pi}$, which are contours of $\hat{\psi}$. Velocity field vectors are shown for $m=1$ whereas arrows in (c,d) merely indicate flow direction. Circulation intensity may be inferred from (a) considering $\kappa ={\rm \pi}$. Pipe cross-section outlines are shown at the crests/troughs of the wavy pattern ($z=\lambda /4$ and $3\lambda /4$ with $\lambda =2{\rm \pi} /k$). Colours illustrate the value of $\psi$ with light (dark) being positive (negative). (e) Pipe design configurations corresponding to the dashed vertical lines in (a); $45^{\circ }$ is marked with a solid vertical line.

Figure 2

Figure 3.Simulation results, $a=0.05,\kappa ={\rm \pi}$ and $m=1$. Here, $Re_\tau$ is the same in the first three rows, and $\varphi$ is the same in the first three columns, as indicated. (a–c, e–g, i–k) Black curves are contours of $\acute {\psi }/(Re\, a^{2})$ indicating streamlines, arrows indicate flow direction; colour contours show deviation of the total streamwise velocity $\overline {u_{z,{tot}}}$ from Poiseuille flow as defined in (4.5). (d,h,l,m–o) Plots of $\acute {\psi }/(Re\, a^{2})$ along the ray $\theta ={\rm \pi} /4$. A common legend applies to all plots where $\varphi$ varies at constant $Re_\tau$ (d,h,l), and vice versa (m–o).

Figure 3

Figure 4.Simulation results with $Re_\tau = 40$. (a) Scaled circulation strength along $\theta ={\rm \pi} /4m$ for $\varphi = 18.6^{\circ }, m_1=1$ and increasing $a$; graphs from top to bottom: $a=0.01, 0.025, 0.05, 0.09,0.125,0.2$. (b–h, l–n) Streamwise-averaged flow (streamlines) and pressure (colour contours, average pressure subtracted). Panels (b–d) have $m = 3$, all other panels $m = 1$. Crossing angle $\varphi =18.6^{\circ }$ except as indicated. Amplitudes are $a=0.05$ (b–f,i,l), $a=0.125$ (j,m), $a=0.2$ (g,h,k,n). (i–k) Streamlines in a streamwise section of the pipe through crests/troughs at $\theta ={\rm \pi} /2$, lighter (darker) colour indicates higher (lower) average absolute velocity.

Figure 4

Figure 5.Maximum circulation strength plotted against increase in friction factor (i.e. increased head loss) in per cent. (a) Comparison of three different crossing angles for $m=1, a=0.05$ – corresponding values of $Re_\tau$ are indicated for each marker (common for overlapping markers); (b) same cases as in (a), but with Reynolds number as abscissa; (c) increasing amplitude for $Re_\tau =40$ and $m=1$.

Figure 5

Figure 6.Mean transport of streamwise-averaged vorticity, $(\overline {\boldsymbol{u}}\boldsymbol {\cdot }\boldsymbol {\nabla })\overline {\omega _z}$, for $a=0.05, m=1$ and $Re_\tau =40$. Dashed curves indicate the inner and outer circles of vorticity production, marked with a circle and square, respectively.

Figure 6

Figure 7.Terms on the right-hand side of (5.5). Each row corresponds to a case in figure 6 with $\varphi$ as indicated.

Figure 7

Figure 8.Same as in figure 7, but the terms ${\propto }\sin (4 m\theta )$ only.

Figure 8

Figure 9.Initial growth rate compared with final steady-state solution. (a) Initial growth rate, inviscid. (b) Ultimate, steady-state solution. (c) Streamlines.

Supplementary material: File

Ellingsen et al. supplementary material

Ellingsen et al. supplementary material

Download Ellingsen et al. supplementary material(File)
File 16.9 MB