Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T01:50:38.460Z Has data issue: false hasContentIssue false

Development of a three-dimensional free shear layer

Published online by Cambridge University Press:  25 August 1998

A. J. RILEY
Affiliation:
Department of Aerospace Engineering, University of Bristol, Bristol, BS8 1TR, UKPresent address: 45A Erpingham Road, Putney, London, SW15 1BQ, UK.
M. V. LOWSON
Affiliation:
Department of Aerospace Engineering, University of Bristol, Bristol, BS8 1TR, UK
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Experiments have been undertaken to characterize the flow field over a delta wing, with an 85° sweep angle, at 12.5° incidence. Application of a laser Doppler anemometer has enabled detailed three-dimensional velocity data to be obtained within the free shear layer, revealing a system of steady co-rotating vortical structures. These sub-vortex structures are associated with low-momentum flow pockets in the separated vortex flow. The structures are found to be dependent on local Reynolds number, and undergo transition to turbulence. The structural features disappear as the sub-vortices are wrapped into the main vortex core. A local three-dimensional Kelvin–Helmholtz-type instability is suggested for the formation of these vortical structures in the free shear layer. This instability has parallels with the cross-flow instability that occurs in three-dimensional boundary layers. Velocity data at high Reynolds numbers have shown that the sub-vortical structures continue to form, consistent with flow visualization results over fighter aircraft at flight Reynolds numbers.

Information

Type
Research Article
Copyright
© 1998 Cambridge University Press