Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-15T02:51:10.296Z Has data issue: false hasContentIssue false

Diffuse-interface modelling of droplet impact

Published online by Cambridge University Press:  22 May 2007

V. V. KHATAVKAR
Affiliation:
Materials Technology, Dutch Polymer Institute, Eindhoven University of Technology, PO box 513, 5600 MB Eindhoven, The Netherlands p.d.anderson@tue.nl
P. D. ANDERSON
Affiliation:
Materials Technology, Dutch Polymer Institute, Eindhoven University of Technology, PO box 513, 5600 MB Eindhoven, The Netherlands p.d.anderson@tue.nl
P. C. DUINEVELD
Affiliation:
Philips Research, Prof. Holstlaan, 4, 5656 AA, Eindhoven, The Netherlands
H. E. H. MEIJER
Affiliation:
Materials Technology, Dutch Polymer Institute, Eindhoven University of Technology, PO box 513, 5600 MB Eindhoven, The Netherlands p.d.anderson@tue.nl
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The impact of micron-size drops on a smooth, flat, chemically homogeneous solid surface is studied using a diffuse-interface model (DIM). The model is based on the Cahn–Hilliard theory that couples thermodynamics with hydrodynamics, and is extended to include non-90° contact angles. The (axisymmetric) equations are numerically solved using a combination of finite- and spectral-element methods. The influence of various process and material parameters such as impact velocity, droplet diameter, viscosity, surface tension and wettability on the impact behaviour of drops is investigated. Relevant dimensionless parameters are defined and, depending on the values of the Reynolds number, the Weber number and the contact angle, which for the cases considered here range from 1.3 to 130, 0.43 to 150 and 45° to 135°, respectively, the model predicts the spreading of a droplet with or without recoil or even rebound of the droplet, totally or partially, from the solid surface. The wettability significantly affects the impact behaviour and this is particularly demonstrated with an impact at Re = 130 and We = 1.5, where for θ < 60° the droplet oscillates a few times before attaining equilibrium while for θ ≥ 60° partial rebound of the droplet occurs, i.e. the droplet breaks into two unequal sized drops. The size of the part that remains in contact with the solid surface progressively decreases with increasing θ until at a value θ ≈ 120° a transition to total rebound happens. When the droplet rebounds totally, it has a top-heavy shape.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2007