Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T04:34:58.551Z Has data issue: false hasContentIssue false

Drag and lift forces on interface-contaminated bubbles spinning in a rotating flow

Published online by Cambridge University Press:  10 April 2009

MARIE RASTELLO*
Affiliation:
Laboratoire de Mécanique des Fluides et d'Acoustique, Ecole Centrale de Lyon-CNRS-Université Claude Bernard Lyon 1-INSA Lyon, 36 Avenue Guy de Collongue, 69134 Ecully cedex, France
JEAN-LOUIS MARIÉ
Affiliation:
Laboratoire de Mécanique des Fluides et d'Acoustique, Ecole Centrale de Lyon-CNRS-Université Claude Bernard Lyon 1-INSA Lyon, 36 Avenue Guy de Collongue, 69134 Ecully cedex, France
NATHALIE GROSJEAN
Affiliation:
Laboratoire de Mécanique des Fluides et d'Acoustique, Ecole Centrale de Lyon-CNRS-Université Claude Bernard Lyon 1-INSA Lyon, 36 Avenue Guy de Collongue, 69134 Ecully cedex, France
MICHEL LANCE
Affiliation:
Laboratoire de Mécanique des Fluides et d'Acoustique, Ecole Centrale de Lyon-CNRS-Université Claude Bernard Lyon 1-INSA Lyon, 36 Avenue Guy de Collongue, 69134 Ecully cedex, France
*
†Email address for correspondence: marie.rastello@ec-lyon.fr
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The equilibrium position of a spherical air bubble in a solid body rotating flow around a horizontal axis is investigated experimentally. The flow without bubbles is checked to be solid body rotating. The area of influence of the bubble is characterized to determine for each bubble whether the incoming flow is perturbed or not. The demineralized water used is shown to Tbe contaminated, and spinning of the bubble's interface is observed and measured. From the measurement of the bubble's equilibrium position, drag and lift coefficients are determined. They appear to be dependent on two dimensionless numbers. Eo the Eötvös number and Rω the rotational Reynolds number (or Taylor number Ta) can be varied independently by changing the control parameters, and for that reason are the convenient choice for experiments. (Re, Ro) with Ro the Rossby number is an equivalent choice generally adopted in the literature for numerical simulations, and Re denotes the Reynolds number. When using this second representation, the Ro number appears to be an indicator of the influence on the force coefficients of the shear, of the curvature of the streamlines of the flow and of the bubble's spinning. The bubble's spinning effect on the lift force is far from trivial. Its contribution explains the important gap between lift values for a bubble (not spinning) in a clean fluid and for a bubble (spinning) in a contaminated fluid as present.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2009