Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T19:19:10.658Z Has data issue: false hasContentIssue false

Dynamics of a deformable, transversely rotating droplet released into a uniform flow

Published online by Cambridge University Press:  30 August 2011

Eric K. W. Poon
Affiliation:
Institute of High Performance Computing, 1 Fusionopolis Way, No. 16-16 Connexis, Singapore 138632, SingaporeDepartment of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3010, Australia
Shaoping Quan*
Affiliation:
Institute of High Performance Computing, 1 Fusionopolis Way, No. 16-16 Connexis, Singapore 138632, Singapore
Jing Lou
Affiliation:
Institute of High Performance Computing, 1 Fusionopolis Way, No. 16-16 Connexis, Singapore 138632, Singapore
Matteo Giacobello
Affiliation:
Air Vehicles Division, Defence Science and Technology Organisation, 506 Lorimer Street, Fishermans Bend, Victoria 3207, Australia
Andrew S. H. Ooi
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3010, Australia
*
†Email address for correspondence: quansp@ihpc.a-star.edu.sg
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The effects of transverse rotation on the dynamics of a droplet released into a uniform free stream are numerically investigated. The range of the dimensionless rotation rate is limited to $0\leq {\Omega }^{\ensuremath{\ast} } \leq 1$, to avoid any possibility of the droplet breaking up. Droplet dynamics and deformations undergo distinct changes when the dimensionless rotational rate $({\Omega }^{\ensuremath{\ast} } )$ reaches a critical value. The critical rotational rate ${{\Omega }_{crit} }^{\ensuremath{\ast} } $ is sensitive to the change in the density ratio, but less dependent on the viscosity ratio and interfacial tension. Below ${{\Omega }_{crit} }^{\ensuremath{\ast} } $, the droplet drag coefficients are reduced marginally as the effect of the rotation is quickly suppressed by the free stream. Above ${{\Omega }_{crit} }^{\ensuremath{\ast} } $, the drag coefficients decrease initially as the rotation effect dominates at earlier times, resulting in a global minimum. The drag coefficients increase monotonically at later times, when the rotation effects decrease and the free-stream effects become dominant. The only exception is with the increase in the viscosity ratio and the surface tension, which either inhibits droplet deformation or restores the droplet to a more spherical shape in the late stages of droplet evolution. The droplet also experiences lift due to the effects of the transverse rotation. It is observed that the lift coefficients are less dependent on the droplet frontal area as the lift is generated by the velocity difference between the upper and lower interface. In general, the lift coefficients increase with ${\Omega }^{\ensuremath{\ast} } $ at earlier times and decrease at later times as the difference in the velocity between the upper and lower interface decreases. In some extreme cases, the lift coefficients even become negative.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2011