Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T19:35:43.023Z Has data issue: false hasContentIssue false

Evolution of linear internal waves over large bottom topography in three-layer stratified fluids

Published online by Cambridge University Press:  23 October 2024

Jin Chai
Affiliation:
Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, PR China
Zhan Wang*
Affiliation:
Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, PR China
*
†Email address for correspondence: zwang@imech.ac.cn

Abstract

Evolutions of internal waves of different modes, particularly mode 1 and mode 2, passing over variable bathymetry are investigated based on a new numerical scheme. The problem is idealized as interfacial waves propagating on two interfaces of a three-layer density stratified fluid system with large-amplitude bottom topography. The Dirichlet-to-Neumann operators are introduced to reduce the spatial dimension by one and to adapt the three-layer system and significant topographic effects. However, for simplicity, nonlinear interactions between interfaces are neglected. Numerical techniques such as the Galerkin approximation, proven effective in previous works, are applied to save computational costs. Shoaling of linear waves on an uneven bottom is first studied to validate the proposed formulation and the corresponding numerical scheme. Then, for two-dimensional numerical experiments, mode transition phenomena excited by locally confined bottom obstacles and quickly varying topographies, including the Bragg resonance, mode-2 excitation, wave homogenization, etc., are investigated. In three-dimensional simulations, internal wave refraction by a Luneberg lens is considered, and good agreement is found in comparison with the ray theory. Finally, in the limiting case, when the top layer can be negligible (for example, a gas layer of extremely small density), the problem is reduced to a two-and-a-half-layer fluid system, where an interface and a surface are unknown free boundaries. In this situation, the surface signature of an internal wave is simulated and verified by introducing the realistic bathymetry of the Strait of Gibraltar and qualitatively compared with the satellite image.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of interfacial waves propagating over large bottom topography in a three-layer density stratified system.

Figure 1

Figure 2.Characteristics of monochromatic waves in three-layer configurations, including the dispersion relation between $k$ and $c_{\phi }$ and the ratio between wave displacements on two interfaces as a function of wavenumber: mode 1 internal waves (single lines) and mode 2 internal waves (lines with marks). Results are shown for (a,b) $(R_1, R_2, \mu )=(0.6,0.6,0.1)$ with $(\varTheta _1, \varTheta _2)=(1,1)$ (black solid lines), $(\varTheta _1, \varTheta _2)=(3,1)$ (blue dashed lines) and $(\varTheta _1, \varTheta _2)=(1,2)$ (red dotted lines); (c,d) $(R_1, \varTheta _1, \varTheta _2, \mu )=(0.6,1,1,0.1)$ with $R_2=0.6$ (black solid lines), $R_2=0.4$ (blue dashed lines) and $R_2=0.2$ (red dotted lines).

Figure 2

Figure 3.(a) Distribution of $c_\phi ^2$ in the $R_1$–$R_2$ plane for $\varTheta _1=\varTheta _2=1$ and $\mu =0.1$. (b) Distribution of $c_\phi ^2$ in the $\varTheta _1$–$\varTheta _2$ plane for $R_1=R_2=0.6$ and $\mu =0.1$. The feasibility region covers all the presented areas.

Figure 3

Figure 4.Two-dimensional monochromatic interfacial waves generated with relaxation zone: waves on the lower interface (solid curves), waves on the upper interface (dotted curves) and theoretical wave amplitudes (horizontal lines). The system parameters are $R_1=R_2=0.6$, $\varTheta _1=\varTheta _2=1$ and $\mu =0.1$. The wave-absorbing zones are $x<5$ and $x>34$, and the wave-making zone is $5< x<15$.

Figure 4

Figure 5.Mode 1 and mode 2 linear waves shoaling over slowly varying bottom topography. The wave-making zone is located in $x<12$, and the system parameters are $\varTheta _1=\varTheta _2=1$, $R_1=0.6$, $R_2=0.4$ and $\mu =0.1$. (a) Wave profiles: waves on the lower interface (solid lines), waves on the upper interface (dotted lines) and theoretical predictions of wave envelope (dashed and dash-dotted lines). (b) Evolution of Hamiltonian computed with various numbers of collocation points: $N=2000$ (black solid line), $N=1600$ (blue circles), $N=1200$ (red squares) and $N=800$ (pink triangles). (c) Grid convergence test: a comparison between the theoretical prediction of downstream wave amplitude and averaged results in numerical simulation.

Figure 5

Figure 6.Mode 1 and mode 2 linear waves shoaling over slowly varying bottom topography. The wave-making zone is located in $x<12$. The system parameters are $\varTheta _1=\varTheta _2=1$, $\mu =0.1$ and various density ratios: (a) $R_1=R_2=0.6$ and (b) $R_1=0.6$, $R_2=0.85$. Solid lines, waves on the lower interface; dotted lines, waves on the upper interface; dashed and dash-dotted lines, theoretical predictions of wave envelope.

Figure 6

Figure 7.A mode 1 linear wave shoaling over slowly varying bottom topography. The wave-making zone is located in $x<12$, and the system parameters are chosen as $R_1=0.6$, $R_2=0.8$, $\varTheta _1=\varTheta _2=1$ and $\mu =0.1$. Solid line, wave on the lower interface; dotted line, wave on the upper interface; dashed and dash-dotted lines, theoretical predictions of wave envelope.

Figure 7

Figure 8.Theoretical predictions of wave amplitude for $R_1=R_2=0.6$, $\mu =0.1$ and different values of depth ratio: $\varTheta _1=\varTheta _2=1$ (solid line); $\varTheta _1=4$, $\varTheta _2=1$ (dashed line); $\varTheta _1=1$, $\varTheta _2=4$ (dotted line). The wave amplitude on the lower interface is presented with a single line, and on the upper interface it is presented with a marked line.

Figure 8

Figure 9.Evolution of an internal wavepacket with a Gaussian envelope past a locally confined, significant bottom topography. The width of the obstacle is $L_0=8$ for (a) and $L_0=4$ for (b), and the other parameters are $\varTheta _1=\varTheta _2=1$ and $R_1=R_2=0.6$. Wave profiles at $t=0$, $t=25$, $t=50$ and bottom topography are presented from top to bottom. The height of the obstacle is $b_0=0.8$. Solid line, wave on the lower interface; dotted line, wave on the upper interface.

Figure 9

Figure 10.Evolution of internal wavepackets with a Gaussian envelope past a locally confined, significant bottom topography: (a) mode-1 initial profile and (b) mode-2 initial profile. The height of the obstacle is $b_0=0.8$, the width is $L_0=1$ and the other system parameters are $\varTheta _1=\varTheta _2=1$ and $R_1=R_2=0.6$. Wave profiles at $t=0$, $t=25$, $t=50$ and bottom topography are presented from top to bottom. Solid line, wave on the lower interface; dotted line, wave on the upper interface.

Figure 10

Figure 11.Evolution of an internal wavepacket with a Gaussian envelope past a locally confined, significant topography. The height of the obstacle is $b_0=0.8$, the width is $L_0=1$ and the other system parameters are $\varTheta _1=\varTheta _2=1$ and $R_1=R_2=0.9$. Wave profiles at $t=0$, $t=50$, $t=100$ and bottom topography are presented from top to bottom. The solid and dotted lines represent, respectively, interfacial waves on the lower and upper interfaces.

Figure 11

Figure 12.Evolution of mode 1 internal wavepackets with a hyperbolic tangent envelope passing over a quickly varying bottom topography. The fundamental wavelength for the wavepackets is $\lambda =1$ and, for the bottom topography, it is (a) $l=0.8$ and (b) $l=0.4$. Wave profiles at $t=1$, $t=10$, $t=20$ and bottom topography are presented from top to bottom. Solid lines, wave on the lower interface; dotted lines, wave on the upper interface.

Figure 12

Figure 13.Evolution of mode 1 internal wavepackets with a hyperbolic tangent envelope passing over a quickly varying bottom topography. The basic wavelength for the wavepackets is $\lambda =1$ and, for the bottom topography, it is (a) $l=0.267$ and (b) $l=0.25$. Wave profiles at $t=1$, $t=10$, $t=20$ and bottom topography are presented from top to bottom. Solid lines, wave on the lower interface; dotted lines, wave on the upper interface.

Figure 13

Figure 14.A comparison among wave profiles at $t=20$ for wavepackets past over different topographies: a quickly varying bottom topography (solid lines), bottom topography with hyperbolic tangent envelope (dashed line with blue circles) and the flat bottom case (dotted lines with red squares). The quickly varying bottom topography is in the shape of a wavepacket with the basic wavelength $l=0.222$.

Figure 14

Figure 15.A mode 1 internal wave passing over a convex mound with the Luneburg lens profile: (a) $t=5$ and (b) $t=10$.

Figure 15

Figure 16.A comparison between numerical solutions and theoretically predicted rays for a mode-1 incident wave. In the upper figures the dashed lines stand for rays, and the contour plots are the isolines of the internal wave numerically calculated. Wave profiles along the streamwise direction at $y=y_c=5.5$ are shown in the lower figures for $t=9.5$ (solid lines), $t=10$ (dashed lines), $t=10.5$ (dotted lines) and $t=11$ (dash-dotted lines). (a) Waves on the lower interface (the amplitude reaches its maximum at $x\approx 7.45$); (b) waves on the upper interface (the amplitude reaches its maximum at $x\approx 8$).

Figure 16

Figure 17.A comparison between numerical solutions and theoretically predicted rays for a mode-2 incident internal wave. In the upper figures the rays are presented with dashed lines, and the projections of interfaces are plotted for $\eta _1$ (a) and $\eta _2$ (b). Wave profiles along the streamwise direction at $y=y_c=5.5$ are shown in the bottom figures for $t=13$ (solid lines), $t=14$ (dashed lines), $t=15$ (dotted lines) and $t=16$ (dash-dotted lines). The amplitude of $\eta _1$ reaches its maximum at $x\approx 8.3$.

Figure 17

Figure 18.Illustration of the real bathymetry and numerical simulation of the interfacial and free-surface waves passing through the Strait of Gibraltar: (a) bathymetry; (b) internal wave contours at $t=6$; (c) satellite image of internal waves in the Strait of Gibraltar; (d–f) successive snapshots for wave profiles at $t=1.2$, $t=3$ and $t=5.5$.

Figure 18

Figure 19.Free-surface projections at $t=6$ calculated with (a) bathymetry in the Strait of Gibraltar and (b) a flat bottom. (c–e) Cross-sections at different positions: interfacial waves with bathymetry (solid line), free-surface waves with bathymetry (dashed line), interfacial waves with a flat bottom (square mark) and free-surface waves with a flat bottom (dashed line with circular mark). (c) Wave profiles at $y=5$ and the topography profile at the same position marked with a red dotted line; (d) wave profiles at $y=6$; (e) wave profiles with bathymetry at $x=6.8$ and with a flat bottom at $x=6.3$.

Figure 19

Figure 20.Sketch of a two-layer density stratified system separated by an interface and bounded above by a free surface.