Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T07:08:46.008Z Has data issue: false hasContentIssue false

Experiments on fluid flow induced by melting around a migrating heat source

Published online by Cambridge University Press:  20 April 2006

M. K. Moallemi
Affiliation:
School of Mechanical Engineering, Purdue University, West Lafayette. IN 47907. U.S.A.
R. Viskanta
Affiliation:
School of Mechanical Engineering, Purdue University, West Lafayette. IN 47907. U.S.A.

Abstract

A series of melting experiments with a moving horizontal cylindrical heat source at constant surface heat flux have been performed. The heat source was designed in such a way that it could descend under its weight while melting the phase-change material (n-octadecane) surrounding it. The heat-source velocity was measured and the motion and shape of the solid–liquid interface were determined photographically. The effects of the surface heat flux, the density and initial position of the heat source, and the initial subcooling of the solid were investigated and are discussed. Conduction was found to be the dominant heat-transfer mechanism around the lower stagnation point and controlled the terminal velocity of the source. The fluid motion in the melt pool above the heat source was mainly induced by the descent of the source, while natural convection played only a relatively minor role in the motion.

Information

Type
Research Article
Copyright
© 1985 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable