Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T20:14:18.417Z Has data issue: false hasContentIssue false

Experiments on gravitational phase separation of binary immiscible fluids

Published online by Cambridge University Press:  30 October 2007

MISUZU SATO
Affiliation:
Division of Earth & Environmental Sciences, Graduate School of Natural Sciences and Technology, Kanazawa University, Kanazawa 920-1192, Japan
IKURO SUMITA
Affiliation:
Division of Earth & Environmental Sciences, Graduate School of Natural Sciences and Technology, Kanazawa University, Kanazawa 920-1192, Japan
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We conduct experiments on gravitational phase separation of binary immiscible fluids using an oil–water mixture and study how the volumetric and viscosity ratios of the two phases control the separation process. First, we change the volumetric fraction of the two phases. We find that the initial phase separation rate depends strongly on the volumetric ratio of the two phases, and can be modelled by a buoyancy-driven permeable flow using the Blake–Kozeny–Carman permeability formula. Next, we change the viscosity ratios of the two fluids, and we find that there are two distinct regimes with different styles of phase separation. Small viscosity ratio (<100) cases are characterized by a sharp lower boundary and a vertically homogeneous mixture layer. On the other hand, high viscosity ratio (>100) cases are characterized by a diffuse lower boundary and a large vertical gradient of porosity. A polyhedral foam structure develops at the top of the mixture layer which is slow to rupture and to transform into a uniform oil layer. These differences can be interpreted to arise from a faster coalescence rate relative to the separation rate at high viscosity ratios. We simultaneously measured electrical resistivity in order to monitor the temporal change of the mean porosity in the mixture layer. The measurements were found to be consistent with the visual observation.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2007