Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T18:21:11.369Z Has data issue: false hasContentIssue false

Feedback control for form-drag reduction on a bluff body with a blunt trailing edge

Published online by Cambridge University Press:  03 July 2012

Jeremy A. Dahan*
Affiliation:
Department of Aeronautics, Imperial College London, London SW7 2AZ, UK
A. S. Morgans
Affiliation:
Department of Aeronautics, Imperial College London, London SW7 2AZ, UK
S. Lardeau
Affiliation:
CD-adapco, 200 Shepherds Bush Road, London W6 7NL, UK
*
†Email address for correspondence: jeremy.dahan05@imperial.ac.uk
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The objective of this numerical study is to increase the base pressure on a backward-facing step via linear feedback control, to be ultimately translated to a drag reduction on a blunt-based bluff body. Two backward-facing step cases are simulated: a laminar two-dimensional (2D) flow at a Reynolds number of ${\mathit{Re}}_{\theta } = 280$, and a turbulent three-dimensional (3D) flow at ${\mathit{Re}}_{\theta } = 1500$ using large-eddy simulation. The control is effected by a full-span slot jet with zero-net-mass-flux, and two jet locations are examined. Linear system identification is performed to characterize the flow response to actuation, used to synthesize a control law. The control strategy is based on the premise that an attenuation of the instantaneous pressure fluctuations on the base of the step should lead to an increase in the time-averaged base pressure. Open-loop harmonic forcing is examined within a broad frequency range for both the 2D and 3D flows, which are found to respond differently to actuation. The controllers based on disturbance attenuation lead to sensible increases in base pressure (up to 70 % in 2D and 20 % in 3D) with higher efficiency than the best results achieved in open-loop. The results support the conjecture about the link between the base pressure fluctuations and mean, although it is shown that such a black-box model approach is not suitable for optimization without further physical insight.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2012