Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T00:57:28.103Z Has data issue: false hasContentIssue false

Flow in a rotating non-aligned straight pipe

Published online by Cambridge University Press:  20 April 2006

J. Berman
Affiliation:
The Technological Institute, Northwestern University, Evanston, IllinoisPresent address: Department of Chemical Engineering, University of Kentucky, Lexington, Kentucky.
L. F. Mockros
Affiliation:
The Technological Institute, Northwestern University, Evanston, Illinois

Abstract

A third-order regular perturbation solution is developed for laminar flow through a straight pipe that is rotating about an axis not aligned with the pipe axis. Coriolis accelerations produce transverse secondary velocities (similar to those in flow through coiled tubes) and modify the axial-velocity profile. The effects of rotation on the velocity fields are shown to depend on two parameters: (i) the product of axial and rotational Reynolds numbers, and (ii) the square of the rotational Reynolds number itself. Even though their strength increases with increases in parameter magnitudes, transverse circulations are qualitatively insensitive to parametric values. The axial profile, on the other hand, can be significantly modified by the rotation; the zeroth-order parabolic axial profile can be skewed toward the outside, dimpled in the centre with maximums on either side of the centreline, or both, depending on the values of the two parameters. The modification of the axial-velocity profile has important ramifications in the design of heat/mass-transfer devices.

Information

Type
Research Article
Copyright
© 1984 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable