Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:26:33.577Z Has data issue: false hasContentIssue false

Flow past short circular cylinders with two free ends

Published online by Cambridge University Press:  26 April 2006

M. M. Zdravkovich
Affiliation:
Department of Aeronautical and Mechanical Engineering, University of Salford, Salford M5 4WT, UK
V. P. Brand
Affiliation:
Department of Aeronautical and Mechanical Engineering, University of Salford, Salford M5 4WT, UK
G. Mathew
Affiliation:
Department of Aeronautical and Mechanical Engineering, University of Salford, Salford M5 4WT, UKPresent address: Arthur Andersen & Co., The Information Consultancy, Chicago, Illinois, USA.
A. Weston
Affiliation:
Department of Aeronautical and Mechanical Engineering, University of Salford, Salford M5 4WT, UK

Abstract

Preliminary tests have been carried out on short circular cylinders with both ends free. Drag force is measured across the range 6 × 104 < Re < 2.6 × 105 for cylinders of length to diameter ratio L/D between 1 and 10. The effect of hemispherical ends is also investigated. A kind of periodic vortex shedding is found in the range 2 < L/D < 8. The oil-film surface flow visualization shows that the ‘eyes’ near the free ends (regions of low pressure) gradually disappear as L/D is reduced to 3. An asymmetric flow pattern is established for very short cylinders (L/D < 3). The detailed measurements of pressure distribution along and across models shows asymmetries of minimum and base pressures along the span. The asymmetric flow produces yawing and rolling moments which are also measured.

Information

Type
Research Article
Copyright
© 1989 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable