Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T09:06:52.945Z Has data issue: false hasContentIssue false

Instabilities and the formation of bubbles in fluidized beds

Published online by Cambridge University Press:  26 April 2006

K Anderson
Affiliation:
Department of Chemical Engineering, Princeton University, Princeton, NJ 08544, USA
S. Sundaresan
Affiliation:
Department of Chemical Engineering, Princeton University, Princeton, NJ 08544, USA
R. Jackson
Affiliation:
Department of Chemical Engineering, Princeton University, Princeton, NJ 08544, USA

Abstract

As is well known, most gas-fluidized beds of solid particles bubble; that is, they are traversed by rising regions containing few particles. Most liquid-fluidized beds, on the other hand, do not. The aim of the present paper is to investigate whether this distinction can be accounted for by certain equations of motion which have commonly been used to describe both types of bed. For the particular case of a bed of 200 μm diameter glass beads fluidized by air at ambient conditions it is demonstrated, by direct numerical integration, that small perturbations of the uniform bed grow into structures resembling the bubbles observed in practice. When analogous computations are performed for a water-fluidized bed of 1 mm diameter glass beads, using the same equations, with parameters modified only to account for the greater density and viscosity of water and to secure the same bed expansion at minimum fluidization, it is found that bubble-like structures cannot be grown. The reasons for this difference in behaviour are discussed.

Information

Type
Research Article
Copyright
© 1995 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable