Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T14:06:07.066Z Has data issue: false hasContentIssue false

The instability of uniform viscous flow under rollers and spreaders

Published online by Cambridge University Press:  28 March 2006

J. R. A. Pearson
Affiliation:
Imperial Chemical Industries Limited, Akers Research Laboratories, The Frythe, Welwyn, Herts.Now at The Metal Box Co. Ltd., Technical Engineering Division, Borehamwood, Herts.

Abstract

When a thin film of viscous fluid is produced by passing it through a small gap between a roller or spreader and a flat plate, it often presents a waved, or ribbed, surface. An analysis is given here in terms of lubrication theory to show why in many cases flow leading to a uniform film is unstable. Account is taken of surface tension which proves to be a stabilizing factor. The most unstable values of the wave-number, n (characterizing the disturbance), are calculated as functions of the dimensionless variable T/μU0, and of the geometry of the system; T is the surface tension, μ the viscosity and U0 a representative velocity of the fluid. For the particular case of a spreader in the form of a wide-angled wedge, these predictions are compared with experimental observations. Agreement is obtained for values of T/μU0 between about 10 and 0.1, but for smaller values of T/μU0 it is clear that other considerations, involving only viscous and pressure forces, determine the nature of the secondary flow.

Information

Type
Research Article
Copyright
© 1960 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable