Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T07:08:53.440Z Has data issue: false hasContentIssue false

The interaction of an oblique shock wave with a laminar boundary layer revisited. An experimental and numerical study

Published online by Cambridge University Press:  21 April 2006

G. Degrez
Affiliation:
von Kármán Institute for Fluid Dynamics, Chaussée de Waterloo, 72, B-1640 Rhode Saint Genèse, BelgiumPresent address: Université de Sherbrooke, Cité Universitaire, Sherbrooke, Quebec J1K 2R1, Canada.
C. H. Boccadoro
Affiliation:
von Kármán Institute for Fluid Dynamics, Chaussée de Waterloo, 72, B-1640 Rhode Saint Genèse, BelgiumPresent address: Northrop Corporation, Advanced Systems Division, Pico Rivera, CA 90660, USA.
J. F. Wendt
Affiliation:
von Kármán Institute for Fluid Dynamics, Chaussée de Waterloo, 72, B-1640 Rhode Saint Genèse, Belgium

Abstract

An investigation of an oblique shock wave/laminar boundary layer interaction is presented. The Mach number was 2.15, the Reynolds number was 105 and the overall pressure ratio was 1.55. The interation has been demonstrated to be laminar and nominally two-dimensional. Experimental results include pressure distributions on the plate and single component laser-Doppler velocimetry velocity measurements both in the attached and separated regions.

The numerical results have been obtained by solving the full compressible Navier-Stokes equations with the implicit approximate factorization algorithm by Beam & Warming (1980). Comparison with experimental data shows good agreement in terms of pressure distributions, positions of separation and reattachment and velocity profiles.

Information

Type
Research Article
Copyright
© 1987 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable