Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T17:32:47.944Z Has data issue: false hasContentIssue false

The interactive dynamics of flow and directional solidification in a Hele-Shaw cell Part 2. Stability analysis and nonlinear simulations

Published online by Cambridge University Press:  05 November 2002

SUDHIR S. BUDDHAVARAPU
Affiliation:
Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA 90089-1191, USA
ECKART MEIBURG
Affiliation:
Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA 90089-1191, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A linear stability analysis as well as nonlinear simulations are performed in order to analyse the coupling between the directional solidification of a binary alloy and the flow in its melt. An incompressible, potential flow model is assumed, whose validity is tested through comparisons with the accompanying experiments of Zhang & Maxworthy (2002) in a Hele-Shaw cell. The linear stability analysis predicts that a uniform flow parallel to the interface reduces the growth rates of directional solidification instabilities. In addition, the dominant wavelength is shifted to larger values by the flow, and a small propagation velocity in the downstream direction is observed. These findings are confirmed by the nonlinear simulations as well. While the overall stabilization is confirmed by the experiments, the predicted values of the dominant wavenumber and its growth rate are too high by factors of two and four, respectively. These differences are attributed to the existence of a velocity boundary layer in the melt, which strongly affects the lateral solute transport.

Information

Type
Research Article
Copyright
© 2002 Cambridge University Press