Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T10:24:40.501Z Has data issue: false hasContentIssue false

Laboratory experiments simulating a coastal river inflow

Published online by Cambridge University Press:  11 May 2006

ALEXANDER R. HORNER-DEVINE
Affiliation:
Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305-4020, USAPresent addess: Department of Civil and Environmental Engineering, University of Washington, Seattle, WA, 98195-2700, USA.
DEREK A. FONG
Affiliation:
Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305-4020, USA
STEPHEN G. MONISMITH
Affiliation:
Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305-4020, USA
TONY MAXWORTHY
Affiliation:
Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA 90089, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The dynamics of buoyant water entering a rotating basin are studied using a series of laboratory experiments designed to elucidate the alongshore transport mechanisms in river plumes. Inflowing water, which is discharged perpendicular to the tank wall, is observed to form a growing anticyclonic bulge and a coastal current downstream of the bulge. Detailed simultaneous measurements of the velocity and buoyancy fields in the plume confirm that the bulge momentum is in a gradient–wind balance and the coastal current is geostrophic. The growth of the bulge and accumulation of fluid within it coincides with a reduction in coastal current transport to approximately 50% of the inflow discharge. The bulge is characterized by a depth scale, $h$, which is proportional to the geostrophic depth, $h_{g}$, and two time-dependent horizontal length scales, $y_{c}$, the displacement of the bulge centre from the wall, and $r_{b}$, the effective radius of the bulge. These two length scales are proportional to the inertial radius, $L_{i}$, and the local Rossby radius, $L_{b}$, respectively. When $r_{b}\gg y_{c}$, the bulge is held tightly to the wall, and a relatively large fraction of the inflow discharge is forced into the coastal current. For plumes with $y_{c}$ approaching $r_{b}$, the bulge is further from the wall, and the coastal current flux is reduced. Once ${y_{c}}/{r_{b}}\,{>}\,0.7$, the bulge separates from the wall causing flow into the coastal current to cease and the bulge to become unstable. In this state, the bulge periodically detaches from and re-attaches to the wall, resulting in pulsing transport in the coastal current. Scaling of the bulge growth based on $h_{g}$, $L_{i}$ and $L_{b}$ predicts that it will increase as $\hbox{\it Ro}^{1/4}$, where $\hbox{\it Ro}$ is the inflow Rossby number. The bulge growth, inferred from direct measurements of the coastal current transport, is proportional to $\hbox{\it Ro}^{0.32}$ and agrees with the predicted dependence within the experimental error.

Information

Type
Papers
Copyright
© 2006 Cambridge University Press