Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T18:43:41.414Z Has data issue: false hasContentIssue false

Large-scale vortex structures in turbulent wakes behind bluff bodies. Part 1. Vortex formation processes

Published online by Cambridge University Press:  21 April 2006

A. E. Perry
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, 3052, Victoria, Australia
T. R. Steiner
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, 3052, Victoria, Australia

Abstract

An investigation of turbulent wakes was conducted and phase-averaged velocity vector fields are presented, as well as phase-averaged and global Reynolds normal and shear stresses. The topology of the phase-averaged velocity fields is discussed in terms of critical point theory. Here in Part 1, the vortex formation process in the cavity region of several nominally two-dimensional bluff bodies is investigated and described using phase-averaged streamlines where the measurements were made in a nominal plane of symmetry. It was found that the flows encountered were always three-dimensional and that the mean-flow patterns in the cavity region were quite different from those expected using classical two-dimensional assumptions.

Information

Type
Research Article
Copyright
© 1987 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable