Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T14:15:52.486Z Has data issue: false hasContentIssue false

Modelling high-Reynolds-number effects in fully developed channel flows using a two-scale Reynolds stress model

Published online by Cambridge University Press:  28 November 2024

François Chedevergne*
Affiliation:
DMPE, ONERA, Université de Toulouse, Toulouse, France
Stefan Coroama
Affiliation:
DAAA, ONERA, Institut Polytechnique de Paris, Meudon, France
Vincent Gleize
Affiliation:
DAAA, ONERA, Institut Polytechnique de Paris, Meudon, France
Hervé Bézard
Affiliation:
DMPE, ONERA, Université de Toulouse, Toulouse, France
*
†Email address for correspondence: francois.chedevergne@onera.fr

Abstract

Reynolds-averaged models for solving the Navier–Stokes equations are implicitly based on Kolmogorov's theory for describing energy transfers between the different turbulent scales, which means that all the energy produced at large scales is transferred at a constant rate to the smallest turbulent scales where it is dissipated. As a result, these models use a single scale to describe the turbulence spectrum, which in cases of non-equilibrium turbulence does not provide an adequate description of the transfers actually observed. This is particularly the case for wall-bounded flows at high Reynolds numbers, such as turbulent channel flows. Taking up an approach developed by Schiestel (2007 Modeling and Simulation of Turbulent Flows, ISTE Ltd and John Wiley & Sons), which aims to define a Reynolds-averaged Navier–Stokes model transporting several scales of turbulence, a two-scale Reynolds stress model (RSM) was developed in order to take into account the interactions between the inner and outer regions of wall-bounded flows. The results obtained with the model are compared with the direct numerical simulations (DNS) of Lee & Moser (J. Fluid Mech., vol. 860, 2019, pp. 886–938) in a turbulent channel for several friction Reynolds numbers up to $Re_{\tau }=5200$, for which partial integrations in spectral space were carried out, highlighting distinct behaviours between small and large scales of turbulence. The model developed provides an accurate description of the contributions at small and large scales and thus reproduces the high-Reynolds-number effects observed in DNS data. In addition, comparisons with the DNS data served to validate a large part of the closure relations used for the various terms in the two-scale RSM.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Spectrum partitioning of the two-point correlation tensor $\varphi _{ij}$. In each slice $m$ such that $\kappa \in [{\kappa }^{(m-1)},{\kappa }^{(m)}]$, ${P}^{(m)}_{ij}$ is the corresponding production term, ${D}^{(m)}_{ij}$ the diffusion term, ${\varPhi }^{(m)}_{ij}$ the redistribution term and ${F}^{(m)}_{ij}$ the rate of transfer tensor. The one-point velocity correlation ${R}^{(m)}_{ij}$ is obtained by integration of $\varphi _{ij}$ over slice $m$.

Figure 1

Figure 2.(a) Velocity profiles for the different Reynolds numbers, $Re_{\tau }\in [550,1000,2000,5200]$. Profiles are shifted up two units as $Re_{\tau }$ increases. Darker symbols or lines indicate higher $Re_{\tau }$ values. (b) Cut-off wavelength estimates (see (2.5)) obtained with the two-scale RSM for the four Reynolds numbers.

Figure 2

Figure 3.Reynolds stress diagonal component profiles. The Reynolds number value $Re_{\tau }$ increase from top to bottom. For the sake of clarity, the SS, LS and total contributions of the two-scale RSM results are all drawn with solid lines. The y-axis label is given on top for each column.

Figure 3

Figure 4.Turbulent kinetic energy budget for production $({P_k}^{(m)})$, transfer rate $({\tilde {\varepsilon }}^{(1)})$ and dissipation terms $({\varepsilon }^{(2)})$, as log densities. Darker grey indicates higher Reynolds number $Re_{\tau }$.

Figure 4

Figure 5.Diagonal components of the dissipation tensors (a) ${\varepsilon }^{(2)}_{ij}$ and (b) $\varepsilon _{ij}$ at $Re_{\tau }=5200$.

Figure 5

Figure 6.Diagonal components of the transfer rate tensor ${\tilde {\varepsilon }}^{(1)}_{ij}$ at different $Re_{\tau }$ values. Darker grey indicates higher Reynolds number $Re_{\tau }$.

Figure 6

Figure 7.Budget of ${R}^{(1)}_{11}={\overline {u^{\prime 2}}}^{(1)}$ for $Re_{\tau }=5200$. (a) DNS contributions. (b) Comparisons between sums of different DNS contributions and the modulation term (2.14) of the two-scale model.

Figure 7

Figure 8.Budget of ${R_{33}}^{(1)}={\overline {w^{\prime 2}}}^{(1)}$ for $Re_{\tau }=5200$. (a) DNS contributions. (b) Comparisons between sums of different DNS contributions and the modulation term (2.14) of the two-scale model.