Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T22:24:15.039Z Has data issue: false hasContentIssue false

Modelling of material pitting from cavitation bubble collapse

Published online by Cambridge University Press:  14 August 2014

Chao-Tsung Hsiao*
Affiliation:
Dynaflow, Inc., 10621-J Iron Bridge Road, Jessup, MD 20794, USA
A. Jayaprakash
Affiliation:
Dynaflow, Inc., 10621-J Iron Bridge Road, Jessup, MD 20794, USA
A. Kapahi
Affiliation:
Dynaflow, Inc., 10621-J Iron Bridge Road, Jessup, MD 20794, USA
J.-K. Choi
Affiliation:
Dynaflow, Inc., 10621-J Iron Bridge Road, Jessup, MD 20794, USA
Georges L. Chahine
Affiliation:
Dynaflow, Inc., 10621-J Iron Bridge Road, Jessup, MD 20794, USA
*
†Email address for correspondence: ctsung@dynaflow-inc.com
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Material pitting from cavitation bubble collapse is investigated numerically including two-way fluid–structure interaction (FSI). A hybrid numerical approach which links an incompressible boundary element method (BEM) solver and a compressible finite difference flow solver is applied to capture non-spherical bubble dynamics efficiently and accurately. The flow codes solve the fluid dynamics while intimately coupling the solution with a finite element structure code to enable simulation of the full FSI. During bubble collapse high impulsive pressures result from the impact of the bubble re-entrant jet on the material surface and from the collapse of the remaining bubble ring. A pit forms on the material surface when the impulsive pressure is large enough to result in high equivalent stresses exceeding the material yield stress. The results depend on bubble dynamics parameters such as the size of the bubble at its maximum volume, the bubble standoff distance from the material wall, and the pressure driving the bubble collapse. The effects of these parameters on the re-entrant jet, the following bubble ring collapse pressure, and the generated material pit characteristics are investigated.

Information

Type
Papers
Copyright
© 2014 Cambridge University Press