Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T08:56:32.971Z Has data issue: false hasContentIssue false

Natural ventilation of an enclosure containing two buoyancy sources

Published online by Cambridge University Press:  26 April 2006

P. Cooper
Affiliation:
Department of Mechanical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
P. F. Linden
Affiliation:
Department of Applied Mathematics and Theoretical Physics, Silver Street, Cambridge CB3 9EW, UK

Abstract

This paper describes experiments and theoretical modelling of a naturally ventilated enclosure containing two point sources of buoyancy. Previous work on the flow and stratification that develop in a space owing to the presence of a single source of buoyancy has been extended to cover two sources of positive or negative buoyancy in an attempt to produce more realistic models of practical problems. Examples include naturally ventilated buildings, and industrial or medical processes involving dispersal of contaminants by air currents. The experimental technique involves the use of a water-filled enclosure with salt solution injected at two points. These sources of negative buoyancy form turbulent plumes within the enclosure. Two sources of unequal strength are found to produce a vertical density profile consisting of three distinct, fully mixed layers. The paper describes a theoretical model that successfully predicts the depths and densities of these layers. The positions of the interfaces between the three layers were found to be a function only of the effective area A* of the enclosure openings, the height of the enclosure H and the ratio of the strengths of the two sources of buoyancy B1/B2. The behaviour of a system with one source of positive buoyancy at the lower boundary and one of negative buoyancy at the upper boundary of the enclosure is also examined. This case has particular relevance to the prediction of thermal stratification in rooms with both cold and warm surfaces present. Again the height of the interfaces is dependent only on the geometry of the enclosure and the source strength ratio. Three distinct types of flow pattern are predicted and observed.

Information

Type
Research Article
Copyright
© 1996 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable