Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T14:53:46.256Z Has data issue: false hasContentIssue false

Near-wall structure of a turbulent boundary layer with riblets

Published online by Cambridge University Press:  26 April 2006

Kwing-So Choi
Affiliation:
British Maritime Technology, 1 Waldegrave Road, Teddington, Middlesex TW11 8LZ, UK

Abstract

A detailed wind tunnel study has been carried out on the near-wall turbulence structure over smooth and riblet wall surfaces under zero pressure gradient. Time-average quantities as ‘well as conditionally sampled profiles were obtained using hotwire/film anemometry, along with a simultaneous flow visualization using the smoke-wire technique and a sheet of laser light. The experimental results indicated a significant change of the structure in the turbulent boundary layer near the riblet surface. The change was confined within a small volume of the flow close to the wall surface. A conceptual model for the sequence of the bursts was then proposed based on an extensive study of the flow visualization, and was supported by the results of conditionally sampled velocity fields. A possible mechanism of turbulent drag reduction by riblets is discussed.

Information

Type
Research Article
Copyright
© 1989 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable