Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T07:34:53.049Z Has data issue: false hasContentIssue false

Numerical simulation of turbulent drag reduction using rigid fibres

Published online by Cambridge University Press:  20 October 2004

J. S. PASCHKEWITZ
Affiliation:
Department of Chemical Engineering, Stanford University, CA 94305, USA
YVES DUBIEF
Affiliation:
Center for Turbulence Research, Stanford University, CA 94305, USA
COSTAS D. DIMITROPOULOS
Affiliation:
Department of Chemical Engineering, Stanford University, CA 94305, USACenter for Turbulence Research, Stanford University, CA 94305, USA
ERIC S. G. SHAQFEH
Affiliation:
Department of Chemical Engineering, Stanford University, CA 94305, USADepartment of Mechanical Engineering, Stanford University, CA 94305, USA
PARVIZ MOIN
Affiliation:
Center for Turbulence Research, Stanford University, CA 94305, USADepartment of Mechanical Engineering, Stanford University, CA 94305, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We present a study of the drag reduction induced by rigid fibres in a turbulent channel flow using direct numerical simulation. The extra stresses due to the fibres are calculated with the well-known constitutive equation involving the moments of the orientation vector. Drag reductions of up to 26% are calculated, with the largest drag reductions observed using non-Brownian fibres and semi-dilute concentrations. These findings suggest that elasticity is not necessary to achieve turbulent drag reduction. Flow statistics show trends similar to those observed in simulation of polymeric drag reduction: Reynolds stresses are reduced, velocity fluctuations in the wall-normal and spanwise directions are reduced while streamwise fluctuations are increased, and streamwise vorticity is reduced. We observe strong correlations between the fibre stresses and inter-vortex extensional flow regions. Based on these correlations and instantaneous visualizations of the flow field, we propose a mechanism for turbulent drag reduction by rigid fibre additives.

Information

Type
Papers
Copyright
© 2004 Cambridge University Press