Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T15:57:03.299Z Has data issue: false hasContentIssue false

Numerical solution of free-boundary problems in fluid mechanics. Part 1. The finite-difference technique

Published online by Cambridge University Press:  20 April 2006

G. Ryskin
Affiliation:
Department of Chemical Engineering, California Institute of Technology, Pasadena, California 91125Present address: Department of Chemical Engineering, Northwestern University, Evanston, Illinois 60201.
L. G. Leal
Affiliation:
Department of Chemical Engineering, California Institute of Technology, Pasadena, California 91125

Abstract

We present here a brief description of a numerical technique suitable for solving axisymmetric (or two-dimensional) free-boundary problems of fluid mechanics. The technique is based on a finite-difference solution of the equations of motion on an orthogonal curvilinear coordinate system, which is also constructed numerically and always adjusted so as to fit the current boundary shape. The overall solution is achieved via a global iterative process, with the condition of balance between total normal stress and the capillary pressure at the free boundary being used to drive the boundary shape to its ultimate equilibrium position.

Information

Type
Research Article
Copyright
© 1984 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable