Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T02:54:03.736Z Has data issue: false hasContentIssue false

On regular reflection to Mach reflection transition in inviscid flow for shock reflection on a convex or straight wedge

Published online by Cambridge University Press:  10 December 2019

He Wang
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei230026, China
Zhigang Zhai*
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei230026, China
*
†Email address for correspondence: sanjing@ustc.edu.cn

Abstract

The regular reflection to Mach reflection ($\text{RR}\rightarrow \text{MR}$) transition in inviscid perfect air for shock reflection over convex and straight wedges is investigated. Provided that the variation of shock intensity only has a second-order effect on the wave transition, the possible cases for the occurrence of the $\text{RR}\rightarrow \text{MR}$ transition for curved shock reflection over a wedge are discussed. For a planar shock reflecting over a convex wedge, four different flow regions are classified and the mechanism of the disturbance propagation is interpreted. It is found that the flow-induced rarefaction waves exist between disturbances generated from neighbouring positions and isolate them. For a curved shock reflecting over a convex wedge, although the distributions of the flow regions are different from those in planar shock reflection, the analysis for the planar shock case can be extended to curved shock cases as long as the wedge is convex. When a diverging shock reflects off a straight wedge, the flow-induced rarefaction waves are absent. However, the disturbances generated earlier cannot overtake the reflection point before the pseudo-steady criterion is satisfied. In the cases considered, the flow in the vicinity of the reflection point will not be influenced by the unsteady flow caused by the shock intensity and the wedge angle variations. This is clearly a local property of the shock–wall interaction, no matter what the history of the shock trajectory is. For validation, extensive inviscid numerical simulations are performed, and the numerical results show the reliability of the pseudo-steady criterion for predicting the $\text{RR}\rightarrow \text{MR}$ transition on a convex wedge.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press
Figure 0

Figure 1.(a) Sketch of wedges that guarantee the wedge angle to be constant (i), to reduce (ii) and to increase (iii–v) for converging shock reflection; ICS is the incident converging shock. (b) Sketch of wedges that guarantee the wedge angle to be constant (i), to reduce (ii–iv) and to increase (v) for diverging shock reflection; IDS is the incident diverging shock.

Figure 1

Table 1.Possible cases for the $\text{RR}\rightarrow \text{MR}$ transition for converging shock reflection in perfect air. Here ${\checkmark}$ means possible and ✗ means impossible. The critical shock Mach number $M_{s}=2.49$ corresponds to the maximum detachment angle calculated from the detachment criterion for a planar shock reflection in perfect air.

Figure 2

Table 2.Possible cases for the $\text{RR}\rightarrow \text{MR}$ transition for diverging shock reflection in perfect air. See table 1 for more details.

Figure 3

Figure 2.(a) Computational domain for grid convergence study; IS is the incident shock. (b) Pressure ratio $p/p_{0}$ profiles with different mesh sizes along the line of $y=75~\text{mm}$ at $127~\unicode[STIX]{x03BC}\text{s}$ after the shock meets the wedge.

Figure 4

Figure 3.Numerical schlieren images of the reflection (a) and zoomed-in images near the reflection point (b): RS, reflected shock; RP, reflection point; PTP, pseudo-triple point; TP, triple point; MS, Mach stem; S, slip line.

Figure 5

Figure 4.(a) Shock polar plots of a planar shock reflecting over a convex wedge for $M_{s}=1.3$. (b) Zoomed-in image near the position where the reflected shock polar intersects with the $p/p_{0}$ axis. Here $\unicode[STIX]{x1D703}$ is the deflection angle; I-1, I-2 and I-3 represent the incident shock polar plots for $\unicode[STIX]{x1D714}=65^{\circ }$, $60^{\circ }$ and $50^{\circ }$, respectively; and R-1, R-2 and R-3 represent the reflected shock polar plots, accordingly.

Figure 6

Figure 5.(a) Variation of pressure ratio ($p_{2}/p_{0}$) with wedge angle when a planar shock with $M_{s}=1.3$ moves along a convex wedge. (b) Variations of $\unicode[STIX]{x1D714}_{p}^{p}$ (the wedge angle separating the compression wave from the rarefaction wave for planar shock reflection), $\unicode[STIX]{x1D714}_{s}$ (the wedge angle separating the subsonic flow from the supersonic flow) and $\unicode[STIX]{x1D714}_{c}^{d}$ (the critical wedge angle determined by the detachment criterion) with shock Mach number. Labels I, II, III and IV stand for four different flow regions: I, subsonic flow plus rarefaction wave; II, subsonic flow plus compression wave; III, supersonic flow plus rarefaction wave; and IV, supersonic flow plus compression wave.

Figure 7

Figure 6.The reflection process of a shock over a convex wedge for various cases: SR, shock-induced rarefaction wave; FR, flow-induced rarefaction wave; SC, shock-induced compression wave; ML, Mach line. The subscripts 1 and 2 represent the first and second waves, respectively.

Figure 8

Figure 7.Computational domains for different models: (a) a convex circular wedge with initial wedge angle $\unicode[STIX]{x1D714}_{0}=90^{\circ }$; and (b) a convex elliptical wedge. Here $R_{1}$ and $R_{2}$ are the horizontal and vertical axis radii of the elliptical convex wedge, respectively.

Figure 9

Table 3.The parameters of different models and the corresponding transition wedge angles. Here $\unicode[STIX]{x1D714}_{c1}^{n}$, $\unicode[STIX]{x1D714}_{c2}^{n}$ and $\unicode[STIX]{x1D714}_{c3}^{n}$ are the transition wedge angles obtained from numerical simulations for $M_{s}=1.5$, 2.5 and 3.5, respectively.

Figure 10

Figure 8.(a) Process of a converging shock reflecting over a convex wedge with constant wedge angle. Here RPL is the reflection process line, which is used to illustrate the reflection process in the ($M_{s},\unicode[STIX]{x1D714}$) plane. (b) Shock polar plots of a converging shock reflecting off a convex wedge with constant wedge angle for $\unicode[STIX]{x1D714}=50^{\circ }$ at three different moments.

Figure 11

Figure 9.(a) Computational domain in numerical simulation. (b) Comparison of critical shock Mach number between the numerical results and the predictions by the detachment criterion.

Figure 12

Figure 10.(a) Schematic of a planar shock reflecting over a convex circular wedge with $\unicode[STIX]{x1D714}_{0}<90^{\circ }$. (b) Schematic of designing the specified curved wedge based on the polar coordinate system centred on convergence centre O.

Figure 13

Table 4.The critical shock Mach number obtained by the detachment criterion $M_{c}^{d}$ and the initial shock Mach number $M_{s}$ for different wedge angles.

Figure 14

Figure 11.The process of a converging shock reflecting off a specified convex wedge with $r_{0}=180~\text{mm}$, $\unicode[STIX]{x1D703}_{0}=25^{\circ }$, $R=275~\text{mm}$ and $\unicode[STIX]{x1D714}_{0}=70^{\circ }$ for $M_{1}=1.68$.

Figure 15

Figure 12.(a) Shock polar plots and (b) variation of $p_{2}/p_{0}$ with $\unicode[STIX]{x1D714}$ of converging shock off a specified convex wedge with $r_{0}=180~\text{mm}$, $\unicode[STIX]{x1D703}_{0}=25^{\circ }$, $R=275~\text{mm}$ and $\unicode[STIX]{x1D714}_{0}=70^{\circ }$ for $M_{1}=1.68$.

Figure 16

Figure 13.(a) The process of a diverging shock reflecting off a specified convex wedge and (b) the variation of $p_{2}/p_{0}$ with $\unicode[STIX]{x1D714}$. Here $r_{0}=100~\text{mm}$, $\unicode[STIX]{x1D703}_{0}=25^{\circ }$, $R=150~\text{mm}$ and $\unicode[STIX]{x1D714}_{0}=60^{\circ }$ for $M_{1}=2.0$.

Figure 17

Table 5.The parameters of six different specified curved wedges and the values of the transition wedge angles as well as the corresponding shock Mach numbers.

Figure 18

Figure 14.(a) Shock polar plots of the reflection process of a diverging shock off a specified convex wedge with $r_{0}=100~\text{mm}$, $\unicode[STIX]{x1D703}_{0}=25^{\circ }$, $R=150~\text{mm}$ and $\unicode[STIX]{x1D714}_{0}=60^{\circ }$ for $M_{1}=2.0$. (b) The zoomed in image near the position where the R polar meets the $p/p_{0}$ axis.

Figure 19

Figure 15.Sketch of computational domain for diverging shock reflection.

Figure 20

Table 6.The parameters of six different specified curved wedges and the values of the transition wedge angles as well as the corresponding shock Mach numbers.

Figure 21

Figure 16.(a) Schematic of a cylindrically diverging shock reflection over a straight wedge. Point O is the diverging centre. (b) Variations of $u_{R}$, $u_{sup}$ and $u_{R}-u_{sup}$ with diverging shock Mach number $M_{90}$ at $\unicode[STIX]{x1D714}=\unicode[STIX]{x1D714}_{90}$.

Figure 22

Figure 17.Reflection processes for cases with different $M_{1}$ and $\unicode[STIX]{x1D714}_{0}$: (a) $M_{1}=2.5$ and (b) $M_{1}=3.5$. The dashed lines represent the flow region II; the dotted lines represent the flow region I; the dash-dotted lines represent the flow region III; and the short dashed lines represent the flow region IV.

Figure 23

Table 7.The values of the transition wedge angles and the shock Mach numbers when the transition happens for cases with different $M_{1}$ and $\unicode[STIX]{x1D714}_{0}$. Here $M_{1}$ is the shock Mach number when the diverging shock meets the leading edge of the straight wedge.

Figure 24

Table 8.The summary of the main results in the present work.

Figure 25

Figure 18.(a) Schematic of a cylindrically converging shock reflection over a straight wedge. (b) The variations of $\text{d}\unicode[STIX]{x1D714}/\text{d}M_{s}$ and $\text{d}\unicode[STIX]{x1D714}_{c}^{d}/\text{d}M_{s}$ with $M_{s}$.