Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T15:43:11.740Z Has data issue: false hasContentIssue false

On water waves generated by a bottom obstacle translating at a subcritical speed

Published online by Cambridge University Press:  02 August 2021

Peter H.-Y. Lo*
Affiliation:
Department of Engineering Science and Ocean Engineering, National Taiwan University, Taipei City 10617, Taiwan
Philip L.-F. Liu
Affiliation:
Department of Civil and Environmental Engineering, National University of Singapore, Singapore 117576, Republic of SingaporeInstitute of Hydrological and Oceanic Sciences, National Central University, Taoyuan City 320317, TaiwanDepartment of Civil and Environmental Engineering, Cornell University, Ithaca, NY 14853, USA
*
†Email address for correspondence: peterhylo@ntu.edu.tw

Abstract

This study investigates water waves generated by a bottom obstacle translating at a subcritical speed in constant water depth, using a combination of analytical and numerical approaches. The newly derived analytical solutions reveal two types of waves – the transient free waves that propagate radially outwards, and the trapped wave that stays on top of the translating bottom obstacle. Closed-form asymptotic solutions for both the free surface and the flow velocities are derived in the far field, and near the leading wave or in the shallow water limit. The far-field leading waves are mathematically shown to be insensitive to the exact shape of the obstacle. Numerical long-wave models are employed to examine effects unaccountable by the linear analytical solutions. Nonlinear effects are found to cause only small deviations from the linear solutions. The effects of the obstacle's acceleration and deceleration are also examined numerically. Overall, the idealised linear analytical solutions predict well the characteristics of water waves generated by a bottom obstacle, and therefore can serve as the cornerstone of a theory-based model for quickly predicting the tsunamis generated by a submarine landslide.

Information

Type
JFM Papers
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.A dimensional definition sketch of water waves generated by a moving bottom obstacle. Both the free surface displacement and the thickness of the obstacle are assumed small in linear wave models; such assumptions are not needed in nonlinear wave models. This study considers only bottom obstacles translating at a subcritical speed.

Figure 1

Figure 2.The LFD wave celerity $D$ in (2.7), plotted as a function of $\mu q$.

Figure 2

Figure 3.The $\varOmega _1$ function, (2.23), compared with the Airy function $\textrm {Ai}$, (2.24). Solid line: $f(s)=\varOmega _1(s)$; dashed line: $f(s)=\textrm {Ai}(s)$.

Figure 3

Figure 4.The free surface elevations predicted by the linear and fully dispersive analytical solutions at three different times, with ${\mathit {Fr}}=0.5$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28). (a–c) The complete integral-form solution (2.18); (d–f) the first term of the far-field leading wave solution (2.22), accurate for large $r$ and near $r=t$ for (a,d) $t=2$; (b,e) $t=6$; (c,f) $t=10$.

Figure 4

Figure 5.The free surface elevations predicted by the LFD analytical solutions plotted along four different directions at three different times, with ${\mathit {Fr}}=0.5$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28): (a–d) $t=2$; (e–h) $t=6$; (i–l) $t=10$ for (a,e,i) $\theta =0$; (b,f,j) $\theta ={\rm \pi} /4$; (c,g,k) $\theta =3{\rm \pi} /4$; (d,h,l) $\theta ={\rm \pi}$. Circles, numerically integrated complete solution (2.18); dashed line, the first term of the far-field leading wave solution (2.22), accurate for large $r$ and near $r=t$.

Figure 5

Figure 6.The flow velocities predicted by the LFD analytical solutions at $t=6$, with ${\mathit {Fr}}=0.5$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28). To enhance legibility, velocities near the bottom obstacle or the origin, where the asymptotic solutions are not applicable, are not shown. The corresponding free surface elevations are also plotted in the background. (a) The complete velocity solutions (shown in the supplementary material) at the still water surface $z=0$; (b) the far-field leading wave velocity solutions (2.27a–c), accurate for large $r$ and near $r=t$.

Figure 6

Figure 7.The $\varOmega _2$ function defined in (2.33) plotted as a function of $s$.

Figure 7

Figure 8.The free surface elevations predicted by the linear shallow water analytical solutions at three different times, with ${\mathit {Fr}}=0.5$ and the Gaussian-shaped $B_0$ given in (2.28). (a–c) The complete integral-form solution (2.18) in the shallow water limit, $\mu \to 0$; (d–f) the far-field solution (2.32), accurate for large $r$ for (a,d) $t=2$; (b,e) $t=6$; (c,f) $t=10$.

Figure 8

Figure 9.The free surface elevations predicted by the linear shallow water analytical solutions plotted along four different directions at three different times, with ${\mathit {Fr}}=0.5$ and the Gaussian-shaped $B_0$ given in (2.28). Circles, the complete integral-form solution (2.18) in the shallow water limit, $\mu \to 0$; dashed line, the far-field solution (2.32), accurate for large $r$: (a–d) $t=2$; (e–h) $t=6$; (i–l) $t=10$. (a,e,i) $\theta =0$; (b,f,j) $\theta ={\rm \pi} /4$; (c,g,k) $\theta =3{\rm \pi} /4$; (d,h,l) $\theta ={\rm \pi}$.

Figure 9

Figure 10.The wave and velocity fields (at the still water surface $z=0$) associated with the ‘trapped wave’ analytical solutions, with ${\mathit {Fr}}=0.5$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28). (a) The integral-form solutions (2.18), shown in the supplementary material, for the trapped wave only; (b) the integral-form solutions in the shallow water limit, $\mu \to 0$.

Figure 10

Figure 11.The free surface elevations associated with the ‘trapped wave’ analytical solutions plotted along four different transects, with ${\mathit {Fr}}=0.5$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28): (a) along $y=0$; (b) along $y=0.2$; (c) along $y=0.4$; (d) along $y=0.6$. Circle and solid line, integral-form solution (2.18), for the trapped wave only; cross and dashed line, the integral-form solution in the shallow water limit, $\mu \to 0$.

Figure 11

Figure 12.The free surface elevations predicted by different wave models at $t=10$, with ${\mathit {Fr}}=0.5$, $\epsilon =0.3$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28). (a) LSWE; (b) NSWE; (c) the far-field shallow water solution (2.32), accurate for large $r$; (d) LWD; (e) WNWD; (f) the first term of the far-field leading wave solution (2.22), accurate for large $r$ and near $r=t$.

Figure 12

Figure 13.The free surface elevations predicted by different wave models plotted along four different directions at $t=10$, with ${\mathit {Fr}}=0.5$, $\epsilon =0.3$, $\mu =0.3$ and the Gaussian-shaped $B_0$ given in (2.28). (a–d) The non-dispersive models, in which the solid lines denote the LSWE results, the dash-dot lines denote the NSWE results and the dashed lines denote the far-field shallow water solution (2.32), accurate for large $r$. (e–h) The dispersive models, in which the solid lines denote the LWD results, the dash-dot lines denote the WNWD results, the dotted lines denote the FNWD results and the dashed lines denote the first term of the far-field leading wave solution (2.22), accurate for large $r$ and near $r=t$. (a,e) $\theta =0$; (b,f) $\theta ={\rm \pi} /4$; (c,g) $\theta =3{\rm \pi} /4$; (d,h) $\theta ={\rm \pi}$.

Figure 13

Figure 14.The five smooth and radially symmetric bottom obstacle shapes considered in this study plotted as functions of $r$. The five different shapes have the same maximum height and enclose the same amount of volume, and their definitions are listed in table 1. Solid line, the Gaussian shape; dash-dot line, the cubic exponential shape; dotted line, the quartic exponential shape; circle, the secant shape; cross, the secant squared shape.

Figure 14

Table 1.The five different smooth bottom obstacle shape functions $B_0$ plotted in figure 14. They all have the same maximum height and enclose the same amount of volume, $V_B={\rm \pi} /8$. Here, ${Ca}\simeq 0.915965$ is the Catalan constant; $\varGamma$ denotes the gamma function.

Figure 15

Figure 15.The free surface elevations generated by bottom obstacles of different shapes and predicted by different wave models, plotted along four different directions at $t=10$, with ${\mathit {Fr}}=0.5$, $\epsilon =0.3$ and $\mu =0.3$. The five different shapes are defined in table 1 and plotted in figure 14. Solid line, the Gaussian shape; dash-dot line, the cubic exponential shape; dotted line, the quartic exponential shape; circle, the secant shape; cross, the secant squared shape. In the top two rows, the dashed lines denote the far-field shallow water solution (2.29); in the bottom two rows, the dashed lines denote the first term of the far-field leading wave solution (2.22). (a–d) LSWE; (e–h) NSWE; (i–l) LWD; (m–p) WNWD. (a,e,i,m) $\theta =0$; (b,f,j,n) $\theta ={\rm \pi} /4$; (c,g,k,o) $\theta =3{\rm \pi} /4$; (d,h,l,p) $\theta ={\rm \pi}$.

Figure 16

Figure 16.The free surface elevations generated by an initially stationary Gaussian-shaped bottom obstacle accelerating for a duration of $t_{acc}$ until it reaches the normalised constant speed ${\mathit {Fr}}=0.5$. The results are numerically simulated based on LSWE. (a–c) Instantaneous acceleration, $t_{acc}\to 0$; (d–f) $t_{acc}=1$; (g–i) $t_{acc}=2$. (a,d,g) $t=2$; (b,e,h) $t=6$; (c,f,i) $t=10$.

Figure 17

Figure 17.The free surface elevations generated by an initially stationary Gaussian-shaped bottom obstacle accelerating for a duration of $t_{acc}=1$ until it reaches the normalised constant speed ${\mathit {Fr}}=0.5$. The results are numerically simulated based on LSWE and plotted along four different directions at five different times. Solid line, $t=6$; dash-dot line, $t=7$; dotted line, $t=8$; circle, $t=9$; cross, $t=10$. The dashed lines denote the $r^{-1/2}$ decay rate suggested by the far-field solution (2.29). Panels show (a) $\theta =0$; (b) $\theta ={\rm \pi} /4$; (c) $\theta =3{\rm \pi} /4$; (d) $\theta ={\rm \pi}$.

Figure 18

Figure 18.The free surface elevations generated by an initially stationary Gaussian-shaped bottom obstacle ($\epsilon =0.3, \mu =0.3$) accelerating for a duration of $t_{acc}$ until it reaches the normalised constant speed ${\mathit {Fr}}=0.5$. The results are numerically simulated based on different wave models and plotted along four different directions at $t=10$. Solid line, instantaneous acceleration, $t_{acc}\to 0$; dash-dot line, $t_{acc}=0.5$; dotted line, $t_{acc}=1$; circle, $t_{acc}=1.5$; cross, $t_{acc}=2$. (a–d) LSWE; (e–h) NSWE; (i–l) LWD; (m–p): WNWD. For (a,e,i,m) $\theta =0$; (b,f,j,n) $\theta ={\rm \pi} /4$; (c,g,k,o) $\theta =3{\rm \pi} /4$; (d,h,l,p) $\theta ={\rm \pi}$.

Figure 19

Figure 19.The free surface elevations generated by an initially stationary Gaussian-shaped bottom obstacle ($\epsilon =0.3, \mu =0.3$) accelerating for a duration of $t_{acc}$ until it reaches the normalised constant speed ${\mathit {Fr}}=0.5$. The results are numerically simulated based on WNWD. (a–c) Instantaneous acceleration, $t_{acc}\to 0$; (d–f) $t_{acc}=1$; (g–i) $t_{acc}=2$. For (a,d,g) $t=2$; (b,e,h) $t=6$; (c,f,i) $t=10$.

Figure 20

Figure 20.The free surface elevations generated by a Gaussian-shaped bottom obstacle which suddenly starts moving at a normalised constant speed ${\mathit {Fr}}=0.5$ for a duration of $t_{{\mathit {Fr}}}=t_{sep}(0)=2$, before decelerating to a halt over a duration of $t_{dec}$. The results are numerically simulated based on LSWE. (a–c) Instantaneous deceleration, $t_{dec}\to 0$; (d–f) $t_{dec}=1$; (g–i) $t_{dec}=2$. For (a,d,g) $t=2$; (b,e,h) $t=6$; (c,f,i) $t=10$.

Figure 21

Figure 21.The free surface elevations generated by a Gaussian-shaped bottom obstacle ($\epsilon =0.3$ and $\mu =0.3$) which suddenly starts moving at a normalised constant speed ${\mathit {Fr}}=0.5$ for a duration of $t_{{\mathit {Fr}}}=t_{sep}(0)=2$, before decelerating to a halt over a duration of $t_{dec}$. The results are plotted along four different directions at $t=10$. Solid line, instantaneous deceleration, $t_{dec}\to 0$; dash-dot line, $t_{dec}=0.5$; dotted line, $t_{dec}=1$; circle, $t_{dec}=1.5$; cross, $t_{dec}=2$. In the top two rows, the dashed lines denote the far-field shallow water solution (2.29) where the obstacle moves at a constant speed indefinitely; in the bottom two rows, the dashed lines denote the first term of the far-field leading wave solution (2.22) where the obstacle moves at a constant speed indefinitely. (a–d) LSWE; (e–h) NSWE; (i–l) LWD; (m–p) WNWD. For (a,e,i,m) $\theta =0$; (b,f,j,n) $\theta ={\rm \pi} /4$; (c,g,k,o) $\theta =3{\rm \pi} /4$; (d,h,l,p) $\theta ={\rm \pi}$.

Figure 22

Figure 22.The free surface elevations generated by a Gaussian-shaped bottom obstacle ($\epsilon =0.3$ and $\mu =0.3$) which suddenly starts moving at a normalised constant speed ${\mathit {Fr}}=0.5$ for a duration of $t_{{\mathit {Fr}}}=t_{sep}(0)=2$, before decelerating to a halt over a duration of $t_{dec}$. The results are numerically simulated based on WNWD. (a–c) Instantaneous deceleration, $t_{dec}\to 0$; (d–f) $t_{dec}=1$; (g–i) $t_{dec}=2$. For (a,d,g) $t=2$; (b,e,h) $t=6$; (c,f,i) $t=10$.

Supplementary material: File

Lo and Liu supplementary material

Lo and Liu supplementary material

Download Lo and Liu supplementary material(File)
File 470.3 KB