Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T00:53:57.330Z Has data issue: false hasContentIssue false

Particle-laden tubeless siphon

Published online by Cambridge University Press:  30 April 2003

J. WANG
Affiliation:
Department of Aerospace and Engineering Mechanics, University of Minnesota, MN 55455, USA
D. D. JOSEPH
Affiliation:
Department of Aerospace and Engineering Mechanics, University of Minnesota, MN 55455, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A tubeless siphon was created by sucking a 1% aqueous PolyoxPolyox is a registered trademark of Union Carbide. solution laden with particles from a beaker into a cylinder by moving a piston. The piston speed and particle concentration were varied. At very high rates of withdrawal, all the liquid could be removed before the siphon broke. In this case, the beaker was completely cleaned without a trace of liquid. The addition of small concentrations of small, nearly neutrally buoyant particles greatly enhanced the pulling power of the liquid, reducing the threshold speed of withdrawal at which the beaker was completely cleaned. At speeds of withdrawal smaller than the threshold not all of the fluid–particle mixture is pulled out of the beaker. The amount pulled out first increases, then decreases as the particle concentration is increased.

Information

Type
Research Article
Copyright
© 2003 Cambridge University Press