Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T05:04:55.017Z Has data issue: false hasContentIssue false

Pulsating electrohydrodynamic cone-jets: from choked jet to oscillating cone

Published online by Cambridge University Press:  14 November 2011

David B. Bober
Affiliation:
Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708, USA
Chuan-Hua Chen*
Affiliation:
Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708, USA
*
†Email address for correspondence: chuanhua.chen@duke.edu
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Pulsating cone-jets occur in a variety of electrostatic spraying and printing systems. This paper reports an experimental study of the pulsation frequency to reconcile two models based on a choked jet and an oscillating cone, respectively. The two regimes are demarcated by the ratio of the supplied flow rate (${Q}_{s} $) to the minimum flow rate (${Q}_{m} $) required for a steady Taylor cone-jet. When ${Q}_{s} \lesssim {Q}_{m} $, the electrohydrodynamic flow is choked at the nozzle because the intermittent jet, when on, emits mass at the minimum flow rate; the pulsation frequency in the choked jet regime is proportional to ${Q}_{s} / {Q}_{m} $. When ${Q}_{s} \gtrsim {Q}_{m} $, the Taylor cone anchored at the nozzle experiences a capillary oscillation analogous to the Rayleigh mode of a free drop; the pulsation frequency in the oscillating cone regime plateaus to the capillary oscillation frequency, which is independent of ${Q}_{s} / {Q}_{m} $.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2011