Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T08:12:12.912Z Has data issue: false hasContentIssue false

The response of a turbulent boundary layer to a step change in surface roughness. Part 2. Rough-to-smooth

Published online by Cambridge University Press:  11 April 2006

R. A. Antonia
Affiliation:
Department of Mechanical Engineering, The University of Sydney
R. E. Luxton
Affiliation:
Department of Mechanical Engineering, The University of Sydney

Abstract

An experimental study of the structure of the internal layer which grows down-stream from a rough-to-smooth surface change shows it to be essentially different from that studied by Antonia & Luxton (1971 b) for the case of a smooth-to-rough perturbation. The rate of growth of the internal layer is less than that for the smooth-to-rough step and it appears that the more intense initial rough-wall flow dictates the rate of diffusion of the disturbance for a considerable distance. Inside the internal layer the mixing length I is increased relative to the equilibrium distribution I = KY. A turbulent energy budget shows that the advection is comparable with the production or dissipation, whilst there seems to be some diffusion of energy into the internal-layer region close to the wall. The boundary layer, as a whole, recovers much more slowly following a rough-to-smooth change than following a smooth-to-rough change, and at the last measuring station (16 boundary-layer thicknesses from the start of the smooth surface) the distributions of mean velocity and Reynolds shear stress are far from self-preserving.

Information

Type
Research Article
Copyright
© 1972 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable