Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T02:53:41.329Z Has data issue: false hasContentIssue false

Secondary flows and developing, turbulent boundary layers in a rotating duct

Published online by Cambridge University Press:  25 October 1998

I. MACFARLANE
Affiliation:
Department of Mechanical and Manufacturing Engineering, The University of Melbourne, Parkville, Victoria 3052, Australia
P. N. JOUBERT
Affiliation:
Department of Mechanical and Manufacturing Engineering, The University of Melbourne, Parkville, Victoria 3052, Australia
T. B. NICKELS
Affiliation:
Department of Mechanical and Manufacturing Engineering, The University of Melbourne, Parkville, Victoria 3052, Australia
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The work presented in this paper represents an experimental investigation into secondary flows, turbulent boundary layers and the interaction of the two as they develop in a zero-pressure-gradient rotating flow field. A duct of intermediate aspect ratio was used to examine secondary flows and determine when they begin to govern the boundary layer development. The aspect ratio (A) was defined as duct height/width at the upstream end of the working section. Measurements were taken at three aspect ratios: A=1, 2 and 4.

A qualitative indication of secondary flow strength was established with mean-cross-stream-plane velocity measurements. A first-order analysis of the secondary flow is presented which provides a reasonable estimation of their strength. Mid-span mean-flow, turbulence and spectra profiles were measured on the duct walls parallel to the axis of rotation. Results are generally presented for A=2 and 1. For A=4 and 2 there were minor effects of secondary flows observed on the mid-span mean flow parameters. The turbulent shear measurements showed some secondary flow effect for A=2. All turbulence and mean-flow quantities were strongly affected by secondary flows for A=1. Spectra results presented for A=2 showed most variation at the low-to-mid wavenumber end. Spectra results for A=1 showed a bodily shift of the whole spectrum towards low wavenumber on the pressure side and high wavenumber on the suction side.

Information

Type
Research Article
Copyright
© 1998 Cambridge University Press