Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T02:47:18.763Z Has data issue: false hasContentIssue false

Sheltering the perturbed vortical layer of electroconvection under shear flow

Published online by Cambridge University Press:  26 January 2017

Rhokyun Kwak*
Affiliation:
Center for BioMicrosystems, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
Van Sang Pham
Affiliation:
Department of Fluid Mechanics and Ship Engineering, Hanoi University of Science and Technology, No1 DaiCoViet, Hanoi, VietnamSingapore-MIT Alliance for Research and Technology (SMART) Centre, Singapore
Jongyoon Han
Affiliation:
Singapore-MIT Alliance for Research and Technology (SMART) Centre, SingaporeDepartment of Electrical Engineering and Computer ScienceDepartment of Biological Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA
*
†Email address for correspondence: rhokyun@kist.re.kr

Abstract

Sheltering of a perturbed vortical layer by a shear flowis a common method to control turbulence and transport in plasma physics. Despite the desire to exploit this phenomenon in wider engineering applications, shear sheltering has rarely been observed in general non-ionized fluids. In this study, we visualize this shear sheltering in a generic neutral-fluid situation in electromembrane desalination: electroconvection (EC) under the Hagen–Poiseuille flow initiated by ion concentration polarization. Our work is the first demonstration of shear sheltering in electrochemical systems. Experiment, numerical simulation and scaling analysis accurately capture the effect by pinpointing the threshold for shear suppression. Determined by balancing the velocity fluctuation (with EC vortices) and the flow shear (with no-slip walls), the threshold for shear suppression is scaled as the EC height. Stable EC with coherent unidirectional vortices occurs under the threshold height, whereas chaotic EC occurs beyond this height as the EC-induced vortical perturbation overwhelms the flow shear. Attractors in a time-delay phase space illustrate this sequence of steady–periodic (stable EC)–chaotic transitions precisely. Going one step further, the shear sheltering effect is decoupled from the shear-independent mechanism of vortex suppression, i.e. vortex sweeping by the mean flow. In the frequency domain, this shear-independent effect is negligible for stable EC (when shear sheltering dominates), whereas it can reduce the level of chaotic fluctuations of chaotic EC (when shear sheltering weakens). Lastly, taken together, we describe the EC-induced convective ion transport by the new scaling law for the electric Nusselt number as a function of the electric Rayleigh number and the Reynolds number. This work not only expands the scientific understanding of EC and the shear sheltering effect, but also affects a broad range of electrochemical applications, including desalination, energy harvesting and sensors.

Information

Type
Papers
Copyright
© 2017 Cambridge University Press 
Figure 0

Figure 1.(a) The current–voltage curve of an ion exchange membrane. (b,c) The two mechanisms for initiating inhomogeneous electric body forces and EC: (b) a heterogeneous membrane with non-conducting sites (black) and (c) a fluctuation of velocity or ion concentration on a homogeneous membrane. Both of these mechanisms induce the inhomogeneous extended space charge layer ($\unicode[STIX]{x1D6FF}_{SCL}$) and the tangential electric field ($E_{t}$) that drives vortical fluid motion. The normal component of the electric field ($E_{n}$) is used to generate the extended space charge layer.

Figure 1

Figure 2.The electromembrane platform and EC under shear flow. (a),(b) Schemes of the cell. (c) Visualized ICP phenomenon at an applied voltage of 20 V and a flow rate of $20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$.

Figure 2

Figure 3.Scheme of the HP flow ($\boldsymbol{u}_{HP}$), corresponding flow shear ($\unicode[STIX]{x1D70F}_{HP}$) and stable unidirectional vortices (circular arrows) in the ion depletion zone (dash-dotted line). Free shear occurs at the middle of the channel $(y=w)$. Electroconvection vortices are assumed to be fully evolved, and have the constant vortex height $d_{EC}$.

Figure 3

Table 1.The parameters used in the simulation model.

Figure 4

Figure 4.Four ICP regimes under shear flow. (a) In situ fluorescent imaging identifies four different ICP regimes under shear flow: linear ICP (2.5 V), EC in diffusion layer (3.75 V), stable EC (7.5 V) and chaotic EC (15 V) at a fixed flow rate ($5~\unicode[STIX]{x03BC}\text{L}^{-1}~\text{min}^{-1}$). The images are sectioned to display the ion depletion zones (the back and lower parts ($3~\text{mm}\times 1~\text{mm}$) of the whole channel (figure 2c)). The inset profiles indicate fluorescent intensity profiles scaled by 200 a.u., which describe the ion concentration $C$ qualitatively. (b) Fluorescent intensity profiles at the channel end (white dotted box in (a)). This intensity/concentration drop also indicates the desalting performance (Kwak et al.2013a). (c) The power spectra of the intensity fluctuation $E_{FI}$. Fast Fourier transform was applied to the curves of the intensity–time profiles in (b).

Figure 5

Figure 5.Phase diagrams of the four ICP regimes under shear flow. The experiments were performed under four flow rates (2.5, 5, 10 and $20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$) and 14 applied voltages (2.5–40 V). Fluorescent images for all of the experiments are available in the supporting information. The results are located in (a) the $V$–$Q$ plane and (b) the $d_{EC}/w$–$d_{diff}/w$ plane. Here, $d_{EC}/w$ is calculated by substituting the applied voltage $V$ and the averaged flow velocity $U_{HP}$ in $d_{EC}/w=0.00963(V^{2}/U_{HP})^{1/3}$; $d_{diff}/w$ is calculated using $d_{diff}/w=0.252(U_{HP})^{-1/3}$. Electroconvection is not observed at 2.5 V; thus, we categorize these cases as linear ICP. The threshold line moves slightly to the right compared with the theoretical value ($d_{EC}/w=0.618$), presumably because we overestimate the voltage drop in the EC zone ($V_{EC}$) by assuming $V\sim V_{EC}$.

Figure 6

Figure 6.Attractors in a time-delay phase space: (a) linear ICP (2.5 V), (b) EC in diffusion layer (3.75 V), (c) stable EC (7.5 V) and (d)–(f) chaotic EC (15–40 V). The flow rate is $5~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$ for all cases.

Figure 7

Figure 7.The dynamics of the stable/chaotic EC at the threshold. At $d_{EC}/w=0.703$, one case shows stable EC (6.25 V, $2.5~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$), but the other shows chaotic EC (12.5 V, $10~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$). This stable/chaotic EC is represented by (a) fluorescent images (supporting movie 2), (b) the time series of the normalized fluorescent intensity on the EC boundary (white arrows in (a)), (c),(d) attractors and (e) the power spectra of (b).

Figure 8

Figure 8.(a) The current–time responses. The currents were recorded for 25 s in 26.5 ms increments. (b) The power spectra of current noise at 2.5–15 V and $5~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$ (the fluorescent images are available in figure 4a). Each case indicates linear ICP (2.5 V), EC in the diffusion layer (3.75 V), stable EC (7.5 V) and chaotic EC (15 V).

Figure 9

Figure 9.The power spectra of current noise at 5–15 V and 2.5–$20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$. (a–b) At 5–6.25 V, stable EC occurs for all flow rates, except for the $20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$ cases (EC in the diffusion layer). (c–d) At 10–15 V, chaotic EC occurs for all flow rates, except at 10 V and $20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$ (stable EC).

Figure 10

Figure 10.The power fluctuation ratio. The ratio of the electric power fluctuation $P^{\prime }$ to the averaged power $\bar{P}$ is enumerated with the height of the EC vortex $d_{EC}/w$. Without chaotic EC, there is no deviation as the flow rate changes. The dotted line indicates $d_{EC}/w=0.618$.

Figure 11

Figure 11.Current–voltage responses. (a) Current–voltage ($I{-}V$) curves and (b) the standard deviations (SDs) of the currents under various flow rates (2.5–20 $\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$). The current responses were measured four times by ramping the voltage up with 0.2 V steps from 0 to 10 V with 30 s delay. We then averaged the current values and calculated the SDs of the current. The inset graph in (a) indicates the relationship between the limiting current $I_{lim}$ and the flow velocity $U_{HP}$. The limiting currents were selected at the knee points of the curves (8.86, 13.15, 17.77 and 2.42 $\unicode[STIX]{x03BC}\text{A}$).

Figure 12

Figure 12.The $Nu_{E}$–$Ra_{E}$ curves for various flow rates (2.5–20 $\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$) and applied voltages (2.5–40 V). The blue, red, green and black points indicate the four ICP regimes (linear ICP, EC in diffusive layer, stable EC and chaotic EC) respectively. The equations of the fitting curves are $y=1.91\times 10^{-7}(x-1225)^{1.5}+1,y=9.18\times 10^{-8}(x-9242)^{1.5}+1,y=4.43\times 10^{-8}(x-18\,898)^{1.5}+1$ and $y=1.98\times 10^{-8}(x-38\,537)^{1.5}+1$ for 2.5–$20~\unicode[STIX]{x03BC}\text{L}~\text{min}^{-1}$ respectively; $R^{2}=0.99$ for all curves. The inset graph shows the linearity between the slope of the fitting curves and $1/Re_{DH}$.

Figure 13

Figure 13.Two-dimensional numerical simulation of stable and chaotic EC. (a) Phase diagram for 15 simulation tests. Here, $d_{EC}/w$ is calculated using $d_{EC}/w=0.1807(V^{2}/U_{HP})^{1/3}$, where $D_{H}=4w=120~\unicode[STIX]{x03BC}\text{m}$ (channel height $h\sim \infty$). The bifurcation of stable and chaotic EC occurs at $d_{EC}/w=0.736{-}0.787$ (grey box). Local dimensionless properties with (b) stable and (c) chaotic EC: (i) ion concentration ($C$), (ii) velocity field ($u_{x}$ in the $x$-direction, $u_{y}$ in the $y$-direction) and (iii) vorticity ($w_{z}$ in the $z$-direction). The colour bars indicate the range of ion concentration ($0{-}0.02C_{0},C_{0}=10~\text{mM}$), velocity ($0{-}1600U_{0},U_{0}=9.887~\unicode[STIX]{x03BC}\text{m}~\text{s}^{-1}$), and vorticity ($-1000f_{0}$–$1000f_{0}$, $f_{0}=l_{0}/U_{0}=60~\unicode[STIX]{x03BC}\text{m}/9.887~\unicode[STIX]{x03BC}\text{m}~\text{s}^{-1}$). Enlarged images are shown in the white dotted boxes. (d–e) At the specific point $x=2l_{0},y=0.06l_{0}$ (white dotted arrow in (b–c), where the origin is at the left bottom corner), the spatial perturbations by the EC vortices can translate to the temporal perturbations as the vortices advect in the flow-wise direction.

Kwak et al. supplementary movie

Supporting Video of diffusion-dominant cases (2.5-3.75V), stable EC (7.5V), and chaotic EC (15V)

Download Kwak et al. supplementary movie(Video)
Video 4.7 MB

Kwak et al. supplementary movie

Supporting Video of the stable and chaotic ECs at the threshold

Download Kwak et al. supplementary movie(Video)
Video 1.3 MB
Supplementary material: File

Kwak supplementary material

Supplementary information

Download Kwak supplementary material(File)
File 6.2 MB