Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T06:53:52.312Z Has data issue: false hasContentIssue false

Spreading of a viscoelastic drop on a solid substrate

Published online by Cambridge University Press:  24 July 2024

Peyman Rostami*
Affiliation:
Leibniz-Institut für Polymerforschung Dresden e.V. Hohe Straße 6, 01069 Dresden, Germany
Mathis Fricke
Affiliation:
Department of Mathematics, TU Darmstadt, Schlossgartenstraße 7, 64289 Darmstadt, Germany
Simon Schubotz
Affiliation:
Leibniz-Institut für Polymerforschung Dresden e.V. Hohe Straße 6, 01069 Dresden, GermanyTU Dresden, Dresden 01062, Germany
Himanshu Patel
Affiliation:
Leibniz-Institut für Polymerforschung Dresden e.V. Hohe Straße 6, 01069 Dresden, Germany
Reza Azizmalayeri
Affiliation:
Leibniz-Institut für Polymerforschung Dresden e.V. Hohe Straße 6, 01069 Dresden, Germany
Günter K. Auernhammer*
Affiliation:
Leibniz-Institut für Polymerforschung Dresden e.V. Hohe Straße 6, 01069 Dresden, Germany
*
†Email addresses for correspondence: rostami@ipfdd.de, auernhammer@ipfdd.de
†Email addresses for correspondence: rostami@ipfdd.de, auernhammer@ipfdd.de

Abstract

We study the spreading of Newtonian viscous (aqueous glycerin solution) and viscoelastic (aqueous polymer solution) drops on solid substrates with different wettabilities. For drops of the same zero-shear viscosity, we find in the early stages of spreading that viscoelastic drops (i) spread faster and (ii) their contact radius shows a different power law vs time than Newtonian drops. We argue that the effect of viscoelasticity is only observable for experimental time scales of the order of or larger than the internal relaxation time of the viscoelastic polymer solution. We attribute this behaviour to the shear thinning of the viscoelastic polymer solution. When approaching the contact line, the shear rate increases and the steady-state viscosity of the viscoelastic drop is lower than that of the Newtonian drop. We support our experimental findings with a simple (first-order) perturbation model that qualitatively agrees with our findings.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.(a) Sketch of the drop-spreading set-up, with a high-speed camera (1), cold light source and diffuser sheet (4), drop and needle (2) and the adjustable solid substrate (3). Different stages of spreading are illustrated over time, (I) before contact between substrate and the drop (II) the substrate is gently coming up and the drop touches the substrate (the initial point of contact). (III) After contact and spreading of the drop on the substrate with contact line velocity of $u_{cl}$. (b) The spreading dynamics of a millimetric drop over a hydrophilic substrate for different times; the spreading radius $r$ is shown.

Figure 1

Table 1.Composition of operating fluids and the zero-shear viscosity $\eta _{0}$ (at 23$\,^\circ$C). The rheological properties of each sample are given in the supplementary material.

Figure 2

Figure 2.(a) Radius of the wetted area ($r$) normalized by the initial radius of the drop ($R$) as a function of time, for water and PEO (3 %, 300k and 3 %, 600k) and water and glycerin (85 %) on hydrophilic substrates. (b) Flow curve of an aqueous PEO (3 %, 300k) solution and a water–glycerin mixture (85 %). (c,d) Spreading exponent ($\alpha$) and spreading prefactor as a function of the zero-shear viscosity $\eta _{0}$ for all viscous Newtonian and viscoelastic liquids mentioned in table 1.

Figure 3

Figure 3.Experimental spreading exponent ($\alpha$) as a function of the zero-shear viscosity $\eta _{0}$ for viscous Newtonian (‘Water and glycerin’) and viscoelastic liquids (‘Water and PEO’) on hydrophobic and hydrophilic substrates.

Figure 4

Table 2.Composition of operating fluids, the zero-shear viscosity $\eta _{0}$ (at 23$\,^\circ$C), the polymer relaxation time $\tau _{ve}$ (s) based on a fit to the Cross model (1.3) and the respective elastocapillary number ${Ec}$ (4.1).

Figure 5

Figure 4.(a) The early stage of drop spreading exponent ($\alpha$) as a function of elastocapillary number ($Ec$) for intermediate molar masses ($300\times 10^{3}$ and $600\times 10^{3}({\rm g}\ {\rm mol}^{-1})$, black squares) and high molar masses ($1000\times 10^{3}$ and $8000\times 10^{3}({\rm g}\ {\rm mol}^{-1})$, red circles) on a hydrophilic substrate and (b) on a hydrophobic substrate. The black dashed lines show the exponent for water on the substrate and red dash lines illustrate the elastocapillary number ${Ec} = 1$.

Figure 6

Figure 5.(a) Fitting of the numerical solution for different viscoelasticity levels ($m=0$ and $m=0.5$) for the case of $r(t)= 0.02t^{0.4}$. (b) The theoretical exponent ($\alpha ^{\prime}$) as a function of $\epsilon Ec^{\ast }$ values, for viscous Newtonian and viscoelastic fluids ($m=0.25$ and $m=0.5$), for the same case.

Figure 7

Figure 6.(a) The effect of viscoelasticity level ($m$) on the effective spreading exponent $\alpha ^{\prime}$ for a fixed value of $\epsilon Ec^{\ast }=0.01$ for $r(t)= 0.02t^{0.5}$. (b) The theoretically predicted effective prefactor ($B^{'}$) vs the different effective viscosity $\epsilon Ec^{\ast }$ values.