Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T19:47:29.191Z Has data issue: false hasContentIssue false

Stability of pressure-driven creeping flows in channels lined with a nonlinear elastic solid

Published online by Cambridge University Press:  09 February 2005

VASILEIOS GKANIS
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, 151 Amundson Hall, 421 Washington Avenue SE, Minneapolis, MN 55455, USA
SATISH KUMAR
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, 151 Amundson Hall, 421 Washington Avenue SE, Minneapolis, MN 55455, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The effect of pressure gradients on the stability of creeping flows of Newtonian fluids in channels lined with an incompressible and impermeable neo-Hookean material is examined in this work. Three different configurations are considered: (i) pressure-driven flow between a rigid wall and a wall lined with a neo-Hookean material; (ii) pressure-driven flow between neo-Hookean-lined walls; and (iii) combined Couette–Poiseuille flow between a rigid wall and a neo-Hookean-lined wall. In each case, a first normal stress difference whose magnitude depends on depth arises in the base state for the solid, and linear stability analysis reveals that this leads to a short-wave instability which is removed by the presence of interfacial tension. For sufficiently thick solids, low-wavenumber modes become unstable first as the applied strain increases above a critical value, whereas for sufficiently thin solids, high-wavenumber modes becomes unstable first. Comparison of the dimensionless critical strains shows that configurations (i) and (ii) are more difficult to destabilize than Couette flow past a neo-Hookean solid. For configuration (iii), the nonlinear elasticity of the solid leads to two physically distinct critical conditions, in contrast to what happens when a linear elastic material is used. The mechanisms underlying the behaviour of the critical strains are explained through an analysis of the interfacial boundary conditions.

Information

Type
Papers
Copyright
© 2005 Cambridge University Press