Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T18:44:41.597Z Has data issue: false hasContentIssue false

Stress relaxation effect in elastico-viscous lubricants in gears and rollers

Published online by Cambridge University Press:  11 April 2006

A. Harnoy
Affiliation:
Department of Mechanical Engineering, University of Rhodesia, Salisbury

Abstract

The stress relaxation effect in an incompressible elastico-viscous fluid is investigated for the case of the lubrication of line-contact rollers. Two extreme cases are considered: that of low pressures with rigid surfaces and constant viscosity and that of heavily loaded elasto-hydrodynamic lubrication. In order to solve this problem, a new invariant material time derivative is suggested. This derivative is referred to a co-ordinate system attached to the principal axes of the strain-rate tensor, while the former derivatives have been referred to the fluid particle. It is shown that, unlike the previous derivatives, the new one enables a separate parametric description of the stress relaxation process and the first normal-stress difference. The results show that a significant increase in the load capacity is obtained, owing to the relaxation time of the fluid. The investigation is for fluids with a relaxation time small compared with the transit time of the lubricant through the bearing.

Information

Type
Research Article
Copyright
© 1976 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable